Jump to content
SAU Community

Deciding Whether Or Not To Build A Cheap Track Car

R33_Dude

By R33_Dude,
in Motorsport Discussion & Builds

 Share

Recommended Posts

  • Replies 86
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

R33_Dude Rising Star

R33_Dude

Posted
  • Author
Posted

No pics yet . Rego'd and definitely roadworthy.

I'm waiting on some money to clear from the bank (check deposit from another car sale... Could take another two days).

Plus another two guys were looking at it for the same reason and they are dead keen. It could still fall through if one of the other blokes gets in first.

Fingers crossed the money will clear and I get there first.

R33_Dude Rising Star

R33_Dude

Posted
  • Author
Posted

Well I did some digging around on its history. Need some second opinions.

Has a new head on the CA18DET. The old one broke a timing belt and destroyed a pair of valves plus other damage. Has a new head with lower k's than the original head plus a new head gasket.

Has a new diff plus a few other bits and pieces. As I mentioned before it still needs a new front bumper.

This all said the bloke will part with it for $5000.

I'm not so sure now. Seems like it has had a tough life... That also said replacing the CA18 is damn easy (comparatively) and I know of three nice cheap (relatively) replacements off the top of my head.

Would anyone else be put off by the way it lost a timing belt and lost a head?

evil_weevil Grand Master

evil_weevil

Posted
Posted

When the new head went on, did they fix or replace anything else?

What caused the timing belt to go?

Any proof, like receipts for the fix?

I'd certainly look into it more, which you by the sounds of it!

BezerkR32 Veteran

BezerkR32

Posted
Posted

excellent mate, well done, seeme that you are not kidding yourself by thinking it wont cost you more money. dont be too worried about the timing belt issue, it happens, and as long as it was repaired correctly it will be fine, but keep in mind the age and milage of these engines. might be worth a sr20 later on down the track.

  R33_Dude said:
Well I am about to buy a manual S13 complete with CA18DET, a tad dirty and in need of a new front bar and some lovin' but mechanically spot on (and all stock bar a pod filter) with coilovers and new DBA gold slotted rotors. Desperately in need of some better tyres though.

In response to some people here. I am not going to be competitive in any way (at least not yet). This is a learning and fun experience.

I am not too fond of go karting no matter how fun it is - I have had a bit to do with go karts in the past. I prefer the full sized car. I don't care if I will be ridiculously slow. To restate what I said earlier I just want to have fun.

The ten thousand is my initial budget - car, basic modifications, etc. I suspect I will see this balloon out to at least double this by the end of the year. Lets not get confused between a someone wanting to build a cheap, fun car to take to club days and someone who wants to be leading the field.

R33_Dude Rising Star

R33_Dude

Posted
  • Author
Posted
  evil_weevil said:
When the new head went on, did they fix or replace anything else?

What caused the timing belt to go?

Any proof, like receipts for the fix?

I'd certainly look into it more, which you by the sounds of it!

The timing belt snapped due to age I believe.

Well it seems the repair was done by a competent mechanic (as in a good mechanic but wouldn't take it to him myself) and included a head gasket and a low kilometre head replete with stock valves, cams, etc.

There is definite proof - it drives very well, blows no smoke, came on boost cleanly with no surges/spikes of any kind.

I don't know it just turns me off having found the car and then finding it has had major problems in the past but what would you expect for a 19 year old car that has probably been driven every day of its life and driven hard?

Its still cheap no matter how I look at it. I am paranoid of bottom end damage though even though it all looks fine. Its just the risk of something being sh!te thats turning me off....

Maybe I should just keep looking around. Maybe I should just buy it and if something screws up stick to my guns and build a strong SR20/CA18/RB20 to replace it.

phunky_monkey Grand Master

phunky_monkey

Posted
Posted

Sounds like a decent choice you've made their mate. Personally I'd go for an SR, but that's just me.

Have you looked into ex-drift cars? Sometimes you can pick up half decent ones with some work done for not much money, just require a fair bit of tidying up from some dodgy modifications.

Roy Grand Master

Roy

Posted
Posted

Well i am always looking around and if its a CA18DET powered S13 which needs bumper and bodywork and is very std then i would nto be too fussed if you miss it at $5,0000 as i believe you will be able to get better examples for that sort of money

R33_Dude Rising Star

R33_Dude

Posted
  • Author
Posted

Try finding one in tasmania though. Car prices here are ridiculous sometimes - in particular for imports. :)

If you can find a similar car in similar condition either in the state or in a position to be transported here at low cost (aka spirit of tasmania), let me know!

I haven't parted with any cash yet, still waiting on that cheque to clear, and if something better came up I would give the bloke my apologies and snap that up instead.

R33_Dude Rising Star

R33_Dude

Posted
  • Author
Posted
  phunky_monkey said:

^^ :down:

Thats.... Hot... I think I have a pants problem. Be right back...

Kaido_RR Grand Master

Kaido_RR

Posted
Posted

my only advice would be try not to build a track/street car. i started out doing that with my skyline and it does not work. no track car is fun on the street, and when it comes time to move on it sad to see what people are willing to pay for it :down:

thats why im keeping mine and focusing more on track time

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      boost source Size Garrett gt28 gen2

      By TurboTapin 路 Posted

      You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah 路 Posted

      So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • QB6SAGR
      Battle of the broken skylines

      By QB6SAGR 路 Posted

      Damn that was hilarious, and a bit embarrassing for skylines in general 馃槀 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline 路 Posted

      Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Rezz
      Spotted on the street....

      By Rezz 路 Posted

      Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
脳
脳
  • Create New...