Jump to content
SAU Community

Recommended Posts

Hey guys&girls,

just blew my stock turbo in my 33 its a 96 series 2.

I just put a r32 actuator in and it read 1 bar within 5 minutes she made a pop/whistle noise!!!lol

Now i was just wondering what i should do,get it fixed or buy a second hand one?

I just want one that will cop 10pounds all day everyday without issues.

Any ideas would be great,cheers

Link to comment
https://www.sau.com.au/forums/topic/253966-just-blew-my-turbo/
Share on other sites

that would be nice but not too good for the coin side of things, all i want it 10 pounds and im happy,maybe even 12 for as less as possible...........so im thinking another stocker and a decent boost controller will do the job????

what does 10 psi mean? bragging rights?

Run whats safe for the turbo, its not about a number.

Its either replace the stock one, with another stock one for less than 1k.

Or do an upgrade, decently, and spend about 2.5k

Just luck of the draw. Mine takes 15 psi everyday and i drive it hard pretty often.

My advice would be to get another second hand one. Can pick them up for 300 pretty easily. And thats all it will cost you if you are prepared to install it yourself. If not then the cost will probably double to 600..

as said luck of the draw, in my old 180 rb20det i punished it, wouldnt do it knowing what i know now, but it had a ca18det cooler, (thinner than std r32) and was running 1 bar for just over the year that i had it and i thrashed that thing every day, then sold it to a mate and it kept on living until he wrote it off

Im well aware of whats safe, whats not.

Just saying to ensure you run whats safe, and forget about the number (safe or unsafe).

Im not negative, just making a comment to the above, maybe you take that negatively... considering your record on the forum that comes as no surprise.

If you're lucky enough to find one get a R34 neo turbo, comes with the VG30 sized larger rear housing but a nylon compressor wheel meant I didn't notice any lag compared to my S1. I made 4kw more at 10psi compared to 12psi on the S1 R33 turbo. They go for $400-450.

if it were me (eventually i will be in your situation with my series 2) I would park the car for a few months, use public transport if you can or find other ways to get around untill you can afford to put a new upgraded turbo in. I don't mean go all out and put a massive high mounted lag macker in it, put if you get another second hand (suposable good nick) turbo, you run the risk of it stuffing up on you again, you have no idea what life a second hand stock turbo has gone through. they are old, they can fail even if they have minimal play and look and feel fresh. Just buy another decent turbo (brand new), or take your turbo and get it highflowed for about $800 ive seen. Highflows arn't the answer for running massive power, but its more than enough than what you need it for, fairly cheap compared to a new turbo (highflow is basically a newer better turbo of the original and run higher boost).

me personally if i had the money i'd go a new better turbo.

but its your decision

if it were me (eventually i will be in your situation with my series 2) I would park the car for a few months, use public transport if you can or find other ways to get around untill you can afford to put a new upgraded turbo in. I don't mean go all out and put a massive high mounted lag macker in it, put if you get another second hand (suposable good nick) turbo, you run the risk of it stuffing up on you again, you have no idea what life a second hand stock turbo has gone through. they are old, they can fail even if they have minimal play and look and feel fresh. Just buy another decent turbo (brand new), or take your turbo and get it highflowed for about $800 ive seen. Highflows arn't the answer for running massive power, but its more than enough than what you need it for, fairly cheap compared to a new turbo (highflow is basically a newer better turbo of the original and run higher boost).

me personally if i had the money i'd go a new better turbo.

but its your decision

if it's going to take a few months to save up for a upgraded turbo, then it's probably not such a good idea.

the reason for upgrading usually would be more power, which in turn can cause more things to break...

get another good condition stocker on there, run 10psi, and you'll be fine. ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...