Jump to content
SAU Community

Recommended Posts

  • 1 month later...

Finally got time to get up to see Chris and he confirmed my yellow plugs dangling under the seats have nothing to plug into. The anti-submarine rams are completely missing from both front seats.

"Well, there's your problem" :blush:

So my airbag fault is different from most. I reckon there wouldn't be too many others out there that started investigating a flashing airbag warning light and found out the components had been NICKED.

EDIT: deleted name, address (physical & email), phone number & identikit photo of culprit. For legal reasons. :(

  • 1 month later...

I know this is reviving an old thread...but.... I had the airbag light on. Did the key reset and it came back after a couple of days. Took it to the workshop (C-Red in Perth :thumbsup: ) and Mark chucked it on his scanner. No code came up and he reset it properly and it's been good ever since. Mark said there is a known glitch with the V/G/M 35 airbag system- something to do with a passenger side seatbelt switch.

  • 1 month later...
  • 1 month later...

Guys,

My airbag light was flashing and I found the solution on the net and it worked first go on my M35.

Turn the ignition to the "on" position. Watch the airbag light closely(it will be on solid) the split second it goes off(beggining to flash) turn the ignition off, count to 5. Turn back to "on" position and do the same another 2 times.

Next time you turn it to "on" position it will blink really slowly(diagnosing) Then switch off. Next time you turn it on it will be solid and then turn off completely.

hi fellas,

same thing happened to my m35 last night,just tried the above method. It worked..So far so good.Will report back a little later to see if the fix is long term .

Thanks so much for all the advice/ help we pick up on this site.

graham

  • 1 month later...

Try this Stephen... worked for my mates car (although the light just came on again).

Turn the key to the on position and watch the airbag light. It should stay solid for 5-7 secs, and then turn off, and then start to flash.

To reset the light, you must turn the key to on, watch the airbag light stay solid for 5-7 secs and as soon as the airbag light turns off, turn the key to the off position (you have to turn the key to off before the airbag light starts to flash, or you must start over). You need to repeat this 5 times. Try to start the car, and hopefully the light will be reset

Thanks for this I was racking my brain trying to clear the same problem.

The golden question is - will the airbags still work!

and the more pressing question in fine print : is my insurance still valid after I bypassed a safety device. (think about it.)

and the more pressing question in fine print : is my insurance still valid after I bypassed a safety device. (think about it.)

Im not sure if the insurance question is more pressing than the safety one Chris :P

ok after looking into the seats, i dont think the non-electric seats have the rams in them.

i think the plug is just a switch to see if someone is sitting in the seat so the airbag computer knows to deploy any bags in the event of an accident.

i dont want to rip apart my nice RS seats, but it disappears into the bottom cushion

Do these cars have a model that comes without seat bags?

If they do legally you can bypass the seat bags according to the RTA in NSW.

Been there, done that a number of times while i was doing airbags for a living for 5 years.

Of course, the base model has no seat bags or electrics and I haven't seen a ram under mine either although there are plenty of wires. I agree with Duncan, getting the system out of fault so the bags deploy in an accident is much more important to me than how the insurance company will weasel out of their contract.

Of course, the base model has no seat bags or electrics and I haven't seen a ram under mine either although there are plenty of wires. I agree with Duncan, getting the system out of fault so the bags deploy in an accident is much more important to me than how the insurance company will weasel out of their contract.

RS leather optioned seats do not have air bags either... unless the safety option was also ticked by the original purchaser.

RS leather optioned seats do not have air bags either... unless the safety option was also ticked by the original purchaser.

I wish the previous owner of mine (RS with leather) wasn't so safety conscious, then I wouldn't have to go thru all this crap pinch.gif

  • 1 month later...

Hi,

Not sure if this would help - but I had the same annoying problem with my Stagea - got it reset a couple of times and then tried resetting it myself (after reading this forum) with occasional success.

Even called Chris regarding costs for new seats.

Anyhow - took it to Victoria Park Auto Care in Perth and he said something about he cut the yellow plug out from under the seat and bypassed it so it was hardwired (?), said its a common circuit problem with a number of car such as Falcons and BMWs.

It cost us $200 to repair and light had not come back on!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...