Jump to content
SAU Community

Recommended Posts

  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

']wats the max power u can get from a stock turbo FJ? just curious.

and also wat management systems are you guys running? do u have seperate coils rather than sticking with dizzy n shit? (on FJ20s if ne1 has em!)

wolf 3D are good for the fj, they could also be able to provide a simple plug in and play system for you now, $1500+ tuning..

has anyone found info on r30s on any other forums?

There was some discussion on Skylines Downunder until the KIWI's got all funny.

Probably because it is their forum, but were out numbered by aussies, on all forum topics excluding NZ.

But absolutely nothing like this thread.

And there was a Nissan Skyline - Paul Newman sales publication on ebay the other day, that I think I beat crimmo to. By the sounds of the advert, it may have some interesting info in it that I will post.

Things like "wind tunnel tests" etc, on all 1983 > R30 models including DR's & HR2000GT ES & 4 dr's & Hatch 2000GT E etc.

1.  Mobil 75W/90 full synthetic is the oil. It performs as well as Royal Purple, Penrite, Castrol etc and is readily available for top up when necessary.

2.  My R200 4.1:1 is a mechanical CUSCO centre LSD with 80 odd lb preload and I have a Nissan 3.9:1 as a spare.

3.  No! the car is not on the road at present, but as soon as it is I'm heading your way sort of, got to see a mate on The Gold Coast.

1.Sounds good.

2.Good to know,as I'm sure the R32> R200's with the viscous lsd wouldn't need the same spec oil as the early mech R200's.I've ben wanting to confirm a good mech lsd oil with someone who actually has one,not a sales person who thinks an HR31 coupe is a fancy Pintara.

3.Any estimates on when it will be? You'll have to stop over in Port Macquarie on your way...you know,stop,revive,survive.....and so I can check out the '30! :cheers:

']wats the max power u can get from a stock turbo FJ? just curious.

and also wat management systems are you guys running? do u have seperate coils rather than sticking with dizzy n shit? (on FJ20s if ne1 has em!)

I had an EMS QI-4 fuel and ignition ecu running mine.Used the stock FJ dizzy.The EMS was good,could work with several factory pick-up systems.

I'd like to go multi-coil in the future though...

Only problem with the wolf that i know of with the FJ dizzy is u have to get it modified...Bit of hassle for someone like me in SA where if i get defected then i have to try to find a standard FJ dizzy...I am considering going for the EMS 8860 seems like a good piece of equiopment!!

Ghostrider i beleive that u might've beaten Crimmo to that, i was talkin to him last week and he was telling me about that book seems like its quite a handy piece of gear to aquire!!

Yeah the 8860 sound as good as a Motec on paper,and you couldn't complain at $1600.....

If you try getting in touch with EFI Hardware www.efihardware.com they have a programmable ECU (HAWK) and has been working on plug & play systems.

The Hawk has had some pretty good reviews from Zoom when they last did a comparison.

Cost is only $1300.00 or there abouts, but don't know if anyone does them in Adelaide. They seem to be Haltec mad in Adelaide.

Wolf do the V4 Plug & Play ECU which is $1395 for the ECU itself then install and tuning take it to around $2200 ready to drive away. but then i think u have the cost of the multi coil setup added to that so it could get pretty expensive :D

but todd off these forums with white dr30 here in perth is happy with his he is running Wolf V4 with multi coils and making 360 odd rwhp quite happily!

i was hoping for a cheaper sortof alternative like microtech or something is all. wondering if anyone has gone that way. i only earn 200 a week doing nightfill so was hopin there mite be a cheaper one that'd do the trick! that EMS 8860 i guess is $1600 just for the ECU, then tuning install etc would run it out a few hundreed more expensive that the Wolf V4 p&p i guess.

ah well i dont have 2k+ for an ECU atm neway, but i guess it seems Wolf V4 is gona be the way to go in the end :) :) better hope santa brings me a big wad of cash this year haha

Yeah the 8860 sound as good as a Motec on paper,and you couldn't complain at $1600.....

Yeah thats what i rekon to!! My mate is currently having it setup on his series 4 and its a pretty wild motor in there so once thats all done then i shall decide, but so far im impressed with it all! :aroused:

Ghostrider : not everyone in adelaide is haltech mad, but the majority of people here are..If not then like PFC al depends on who u go to really, so many people deal with the same ecu's so its not like deepnds on the workshop u goto depends what ecu u use cause most of them will use 99% of ecu's available

.75 degrees sideways, just bought a r31 with an rb20det in it running a older wolf3D, version 3 i think, the bloke who had it before didn't know that there is a locking system that requires a pin number to start the car if active. my mate went to change the pin and the car wont start!!! had to sent the computer to sydney to get it changed to the new pin so it will work...poor bastart had the car for 24 hours then its been sitting there for the last 48 unable to be driven!

oh my mate ran a microtech DIGI 1 (or was that 2??) on his FJ20.

you can pickup alot of stuff second had cheap and on ebay and stuff, i know a few guys that have been doing so recently.

what ecu's out there are able to run in closed loop? i know my microtech doesn't :(

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • oh they were with that motor, you need to remove the engine to change the spark plugs (don't have to, but it does make it easier)
    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
×
×
  • Create New...