Jump to content
SAU Community

Recommended Posts

I've been recently reading up on the differences of between turbochargers and superchargers - interesting read I must say ;)

Now this question occurred in my mind:

Is it possible to stick both a turbocharger and supercharger into a twin turbo car (let say an R32 GTR 'cause I love them)?

If it were possible what would the benefits be?

Seeing as there would be turbo lag, would the installed supercharger cover for that initially (and once it kicks in, ;))?

Sorry, if a similar question was posted. I was too intrigued my hand couldn't stop typing :D

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/258601-two-kinds-of-turbo/
Share on other sites

stockymystock has an rb30 turbocharged and superchareged

can be done, costs lots of $$$, lots of custom work and changes

twin turbo is easier, cheaper, more normal

a good twin turbo setup would negate the require for super & turbo

as it would provide good average power, remember superchargers suck some power to give some power

its not like its free

sure a supercharger needs crank hp to run, but since it creates boost as soon as it starts turning, and feeds it straight back into the engine to create more power, the hp needed to run the sc is then accounted for. feedback cycle.

eg. engine 100hp

sc 50hp

sc boost power gain 100hp

total hp when you use the engine with sc = 100 - 50 + 100 = 150hp. net increase in power even though the sc takes 50hp, it gives back more almost immediately.

the energy is supplied by the additional fuel burnt as a result of the increased intake charge pressure. you wont experience any 'lag' from a supercharger

the power is not free, you pay for it in fuel. but you dont 'lose' any power from having a sc

if you can do fab work yourself and have the mechanical knowledge, it can be a cost effective option

of course it takes a specific application to require a super/turbo combination.

in track, drag, or most race applications, low end driveablity and torque down low is not usually a factor as gearing and driver skill is used to keep the revs in the powerband (top end of the rev range).

twincharging can be done relatively cheaply using aftermarket parts such as toyota factory superchargers.

unless you want something different there is probably an easier solution to lack of low end torque with a large turbo.

i would suggest a good ecu setup with anti-lag and the use of cheap t3/t4 based turbo chargers (as you'll probably have to replace it once in a while depending on your use of the anti lag).

or nitrous

Is it possible to stick both a turbocharger and supercharger into a twin turbo car (let say an R32 GTR 'cause I love them)?

Sure. There are a couple of aftermarket cars that have been twincharged, and Volkswagen has a production one.

Benefits are no lag at low RPM while getting more power down low thanks to the supercharger, and at high RPM you can enjoy the better efficiencies of a turbocharger.

The problem is getting it all to work together smoothly.

try looking at the twincharged s15 on youtube; was a fantastic watch and the results were fantastic.

sr20 yes but there was almost no lag so on an rb26 i doubt there would be any

are there any superchargers that disengage at a certain rpm???

So do turbochargers.

Technically yes, but in practice: they're sucking energy from waste gasses that are just being ejected out of the car anyway.

They do cause restriction, yes. but they don't suck raw shaft engine power

I believe the superchargers on the 4agze does that.It has a clutch on the blower drive much like an ac clutch

Yep.

I'm pretty sure the supercharged Merc engines have them as well.

They do cause restriction, yes. but they don't suck raw shaft engine power

And that restriction causes pumping losses. Stick a restriction in your exhaust, and see what happens to your power output. It's irrelevant whether that power "loss" has come from something attached to the crank, or something stuck in the exhaust. A power drop caused by an induction charger is still a power drop.

Its misleading to say superchargers "draw power to make power" as a pro against turbochargers, because the latter does the exact same thing.

Turbochargers are more efficient because they draw less power to give the same gain, but its not the free lunch some people make it out to be.

Edited by scathing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...