Jump to content
SAU Community

Recommended Posts

So got an interesting sound coming out of my back left wheel...

It basically sounds like there is a bearing bouncing around in there, at really slow crawling speed i can here it fall and bounce to a stop. "Tick (loud)... tick(softer) tick (softer still) tick tick tick tick... nothing. So yeah don't know if that helps i have taken the wheel right off and found nothing unusual, didn't dare venture into the hub or anything like that

is it going to be wheel bearing or something annoyingly expensive like that??

any help would be appreciated

 

Link to comment
https://www.sau.com.au/forums/topic/259900-ticking-noise-in-back-left-wheel/
Share on other sites

i tried to do that but it wouldn't spin... i had the handbrake off but it might not of release properly or something

made sure you weren't in gear too?

the more severe cases of wheel bearing failure can be diagnosed by rocking the hub in and out from the centre of the car but it doesn't sound like you have this

and to add to ^^^ might have something to do with the attessa system linking all 4 wheels - i'm going to assume you need to lift the front wheels too to be able to spin the rears? could be wrong though as i've never owned an awd car

I remember having a similar thing after a wheel alignment.

I took the car straight back & they found some dirt that was throwing the wheel of and somehow causing the ticking noise. :D

Still don't know how, but no probs as soon as they cleaned it out.

when picked up mine second hand.

got handed a recipt of any repairs done to the car.

REAR left wheels bearing replaced . think it was $100-150 max

being a rear left also on yours may be same problem, never heard the ticking noise as i didnt own it at the time

when picked up mine second hand.

got handed a recipt of any repairs done to the car.

REAR left wheels bearing replaced . think it was $100-150 max

being a rear left also on yours may be same problem, never heard the ticking noise as i didnt own it at the time

Wheel bearing doesn't really squeak or tick... more like a constant rrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr.

At least that is the sound my front passenger wheel bearing assembly made.

May not be the case for you but I have heard of the guys that change tires leaving old tire valves inside the tire(accidently of course). So might be worth taking the wheel off and giving it a shake. May not be the case for you, but at least its gona eliminate one other possibility.

Thanks for all the imput guys :D

I have jacked the car up and i also thought the wheel wouldn't spin due to the AWD system so wasn't to phased about that.

I did also shake the wheel itself a bit and the noise is not coming form that so i don't think changing the wheel with another would make any difference.

I am thinking its just some kind of stone in there some where thats kinda bouncing around... just SOOOO annoying. Im taking the car in soon for some work so will get em to pull the whole wheel hub.assembly apart n find the little bugger.

Cheers all

Could be way off but do you have 2 or 3 piece wheels? My Celsior has some 3 piece Enkei's and I had a clicking sound too. Turns out the wheels were a little bit loose.

So if that's the case check of the studs and see how you go.

may be worth swapping wheels side to side to see if the noise moves to that side.

not something caught up around the drive shaft?

You cant do that side to side if tryres are unidirectional. Only front to back.

I had that once on an old Nissan stanza but from the front wheel. I eventually traced it to the lead wheel balancing weight that wasn't gripping the rim tight enough and every time the wheel moved, especially at slow speed the weight would move round the wheel and tap against the weight on the other side. Can't remember what it was like at speed cos obviously the wheel was not balanced,

pull the wheel off again and check the shims/springs around the brakes pads and make sure they are not touching the disc.

also check between the caliper and disc make sure no little pebble/stone stuck anywhere bouncing/grinding against the disc seen that happen before.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...