Jump to content
SAU Community

Recommended Posts

hey all

as some of you might of heard, in very unfortunate circumstances my sil caught on fire and melted a engine loom, and long and short of the short is it cracked a ring glan and then went down hill from there... so the poor lil 20's days are over :(

but from bad comes good....

and has finally given me a excuse to a RB25/30 :P

so here is what I have so far for the build...

(only started collecting parts only bout 1-2weeks ago)

- RB25 S2 Head

- RB25 Loom

- RB30 S3 Bottom end

- ACL Race Main Bearings

- ACL Rod Bearings

- ACL MLS Headgasket

- 2x Tomei Oil Restrictors

so this is now whats on the to get/do list:

- Boring, Blueprinting etc... on rb30 bottom end

- Arais Forged 20"tho Oversized pistons

- ACL Race Rings

- "x" Forged Rods

- Tomei Pro Cams (264 inlet, 272 exh)

- Stronger Value Springs

- ARP Head Stud Kit

- ARP Rod Bolts

- CNC billet rb30 crank collar

- assorted earls fittings and braided hose

- CNC Powertune RB30 Oil Power gearset

- Gates Timing Belt to suit 25/30 combo

- Custom Oil Drain

- New Water Pump

- Send my turbo back for the new one :D (GT3076R .84r)

- 50mm ext gate (currently running a KKR 38mm)

and thats all I can think of so far...

aiming to have the donk done by june-july... as there is a fair bit of coin right there haha!!

but 3 or so months anit long to wait :)

but if you have any suggestions fire away!!

cheers

Benji

Edited by Benji
Link to comment
https://www.sau.com.au/forums/topic/261976-benjis-new-donk-build-up-2530/
Share on other sites

N1GTR: hitting the streets on permit that is, since mine is a track car!!! :P:(

I enjoy the old permits tho!!! its great fun!!

doing a CNC billet set of oil pump gears that are custom made to fit the std pump surround... but the gears itself are alot stronger and better..

and yes ill be doing a enlarged sump as well...(its similar to the high energy style ones)

and have had a chat to my engine builder and have decided to go with 40"thou oversized pistons, which brings it to 3.1ltr :laugh:!!!

and we are going to piss the vct off as well.. n run some tad smaller cams... and some adjustable cams gears as well

here is a pic of the car when it had the rb20 in it..

(mine is the blue s13.5)

081214ttune015.jpg

w1024.png

081214ttune009.jpg

w1024.png

081214ttune199.jpg

w1024.png

Looks like a great build, i would recommend running an external oil pump, and dry sump it or rear sump it so you can lower the motor.

yeh i would love to run a ext oil pump but its the cash,

donk will fit in sweetly man... just wait and watch what im going to do when the time comes to slide it in...

nice car mate. i guess u drift it? cant go wrong with the rb30's for sliding my 2nd one is in progress aswell

decided to go with 40"thou oversized pistons, which brings it to 3.1ltr
awesome this means i will have 3.1 litres aswell. theres no replacement for displacement haha

yeh started to slide man, only been out 1 n a 1/4 times on the track

and was just starting to get a grip of things then the mis-happen of the engine loom melt down..

oh well now the power will be nice and responsive and will be easier to steer without having to be trying to bring it up on revs...

Edited by Benji

good work mate, i have been for 3 years now haha. i cooked a loom too when my engine blew and oil seal and caught fire on the track. you definately will have more response form the 30 vs the 20 it will be a big difference you will love it.

picked up ARP Headstud Kit today,

next week, the full forged SCAT rods, and 40" over sized Arais Pistons + Arais Rings,

Gates Belt Kit, and my Extended Sump... will be in :D

then after have got all them,

can start to put together the bottom end in the next few weeks

then we are away n cooking with gas :P yay!! : :hypo:

Also awaiting to hear back on the price of my Tomei Poncams + springs... (264deg inlet/exh),

once I know I can order away :)

so getting there at a steady rate now :P

  • 8 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...