Jump to content
SAU Community

Recommended Posts

mate, next time just select second gear

make sure your window is down

make sure your right foot is firmly pressed to the floor

and remember to shake your fist out the wondow while shouting "DORRRIFTOOOOOOO"

hahahahaha +1

Also yes If u knew how to drive :cool:

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Haha its awesome :(

I went from my toyota paseo to my skyline and driving it in the wet for the first time is scary....the second that turbo gets any boost you start going sideways and sh*t yourself lol

Its good to learn how to control your car in the wet and know your limits aswell....

and I was on the way up to the petrol station. was on the road, going 50km/h, braked down to 30, entered roundabout, got halfway through, let go of accelerator, turned to go around and started to lose the back end, corrected twice and was back on the road. OMG HEARTATTACK.

apart from my driving errors, what should i look at to fix the traction problems? tyres obviously, hicas maybe? the thing should be serviced anyway at this point.

auto r34 gt

There seem to have been a load of half answers to your questions and a lot of other stuff besides. In an attempt to pull it all together, please allow me to summarise - and hopefully answer your questions:

a) We don't get much rain here in WA. We also have loads of stone in the tarmac, so it does not melt in the heat. Deposits of rubber, oil and diesel/petrol residues build up on the tarmac/stone. Add water, via a passing shower, and it can become a skating rink in places. Roundabouts are particular favourites because people have fuel spillages and leave more deposits due to going around the corner.

b) Someone already mentioned "classic lift-off oversteer". If you are in a corner and lift off the gas, the balance of the car moves forward. I believe that the science is that it actually moves forward at a tangent to your turn, so a component of the force acts to the side as weight lessens on the back wheels, so on slippy stuff they then slide out.

c) If you have bald tyres, loss of traction is more likely. Some crappy makes of tyres don't perform too well in such conditions, even when they have loads of apparent tread. No tyres perform very well in such conditions.

d) Bugger all to do with HICAS, especially in an R34 which is third generation HICAS. If you are a high performance driver, who has developed a feel for a car over years of driving, you may be able to notice when HICAS does something in a high speed corner. Otherwise, for mere mortals and average drivers (and by the laws of maths, the majority of us are average drivers), you will not be able to tell when HICAS is doing its magic, but like many of the electronic driver aids out there, it is almost certainly helping you.

e) I would be surprised if you have any aggressive limited slip diff in your car. If it is factory, it may have a viscous LSD, not an aggressive mechanical one. So ignore that.

f) If you have non-factory suspension, especially anything that is set rock-hard, then that would not have helped. All that rock hard suspension does is rattle your teeth, destroy the normal, everyday road-holding and give you bragging rights for the few track days you manage to get to. If you have factory suspension, then that ain't part of the problem.

So, in summary: WA roads are very slippy in the wet; your tyres are worth checking; don't make any sudden control changes in a corner. Forget the rest.

Hope this all helps. :P

Cheers. :P

be careful overtaking in auto as well. when mine was auto i went to overtake a bus in the wet and it kicked back on me and you recon you had a heart attack. sideways pass a bus on the opposite side of the road = not good :P

hehehe...wish i could have seen it.

There seem to have been a load of half answers to your questions and a lot of other stuff besides. In an attempt to pull it all together, please allow me to summarise - and hopefully answer your questions:

a) We don't get much rain here in WA. We also have loads of stone in the tarmac, so it does not melt in the heat. Deposits of rubber, oil and diesel/petrol residues build up on the tarmac/stone. Add water, via a passing shower, and it can become a skating rink in places. Roundabouts are particular favourites because people have fuel spillages and leave more deposits due to going around the corner.

b) Someone already mentioned "classic lift-off oversteer". If you are in a corner and lift off the gas, the balance of the car moves forward. I believe that the science is that it actually moves forward at a tangent to your turn, so a component of the force acts to the side as weight lessens on the back wheels, so on slippy stuff they then slide out.

c) If you have bald tyres, loss of traction is more likely. Some crappy makes of tyres don't perform too well in such conditions, even when they have loads of apparent tread. No tyres perform very well in such conditions.

d) Bugger all to do with HICAS, especially in an R34 which is third generation HICAS. If you are a high performance driver, who has developed a feel for a car over years of driving, you may be able to notice when HICAS does something in a high speed corner. Otherwise, for mere mortals and average drivers (and by the laws of maths, the majority of us are average drivers), you will not be able to tell when HICAS is doing its magic, but like many of the electronic driver aids out there, it is almost certainly helping you.

e) I would be surprised if you have any aggressive limited slip diff in your car. If it is factory, it may have a viscous LSD, not an aggressive mechanical one. So ignore that.

f) If you have non-factory suspension, especially anything that is set rock-hard, then that would not have helped. All that rock hard suspension does is rattle your teeth, destroy the normal, everyday road-holding and give you bragging rights for the few track days you manage to get to. If you have factory suspension, then that ain't part of the problem.

So, in summary: WA roads are very slippy in the wet; your tyres are worth checking; don't make any sudden control changes in a corner. Forget the rest.

Hope this all helps. ;)

Cheers. :ninja:

I couldnt agree with you more :D

  • 2 weeks later...

worst place to be for the first rain after a hot streak or for any rain is the roundabout on east pde in east perth just after farmer fwy

lol u have to take that at -15km or ur going to go sideways. lol first time around there i just rained and went to go around like normal speed hahaha i was sideways all the way round to brook st i got some funny looks that day.

also i know a girl trying to get on to Mirrabooka Ave from Boyare Ave after first rain she lost it panicked and went into a tree she was fine but the car was a complete totaled

I love the rain and my hard suspension... not. Sure it handles fantastically in the dry (which WA mostly is), but in the wet it becomes near impossible to drive normally. Even letting the clutch out near stall point on a slight incline and barely touching the throttle it will nearly always spin the wheels for a little bit. Just have to power through it and ignore the dirty looks from nearby drivers :) Anyway, no accidents but I definitely have respect for wet roads and don't do anything stupid (at least when there are other people on the road :)). I drive slower/brake earlier than a grandma when it rains haha

Yeah I have pretty stiff suspension too [car came like that] and going through a roundabout I've taken for over 6 years now for the first time I lost control... horrendously scary when you don't mean to do it. Luckily it was @ 3am after work and I was able to counter-steer/fishtail it till it came to a stop (still on my side) so I was pretty happy with the end result.

It is not your suspension, it is your tyres. Cheap shit tyres have stuff all grip in wet/greasy conditions. That is why you spend money on good tyres as opposed to spending money on panel beating.
+1

So are both of you saying high end coilovers which are built to be STIFF... DO NOT affect your traction in any way at all?

Somehow i doubt this. If anything, its going to be a combination of the two. Having shagged suspension will also lessen your traction, as well as having over stiff suspension in the car in COMBINATION with sub standard or worn tyres.

Obviously this is because when you take off from a stand start, the car is unable to "squat" down which in doing so provides more contact with the road, hence more traction. (Which is why most draggers will use STOCK suspension, as its perfect for achieveing this)

The coil overs I'm using now are extremely stiff this is becuase that are the "drift" series of the the HKS Hipermax, which really is meant for race use only. According to HKS, they are stiff to help the driver enable to initiate the drift. After this a "helper" spring which is built into the rear coilovers then help to press the tyres to the ground, giving the driver more "feeling and control" on how his or her car is going. Due to this, HKS does recommend that the car with this suspension fitted uses "high grip radial tires" to help offset this.

Having said this, I am running street tyres on my skyline. Fed 595SS. 235 FRont and 255 rear. When taking off in the wet ( at normal speeds and revs) SOMETIMES my rear tyres will spin a bit. This is a COMBINATION between Feds being not to great in the wet and my suspension set up being too stiff.

However, when cornering, as long as i take it slow and be careful my car will not spin out or anything extreme like that.

Thats My 2 cents on the matter.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...