Jump to content
SAU Community

Recommended Posts

Ecu need learning throttle close position and (TAS) throttle adjust screw if ecu connector or throttle position connector is removed, after adjusting timing , adjusting idle, when battery becomes flat or after changing batteries ,Z33 34 M35 etc

I think some people need this one.

So this is something different to the idle learn procedure? If so, I'd say EVERYONE needs it.

Would you care to elaborate on the procedure for this, please Toshi?

Edited by Daleo

I cant seem to find the Teps website, has it disappeared?

lol, the link in my sig hasn't changed... still works no problem

On top of that I think you might find the VQ35 does not have a throttle restriction.

They still use the VQ25det engine, but stroke it out using (at a minimum) VQ35de crank and rods.

Doesn't make it 3.5L though.

EDIT: just calculated it, 3.25L if you put VQ35 crank and rods in a vq25det (maintaining the same bore)

Edited by iamhe77

I've seen a 3.6L TEPS built VQ25DET on a link on here. The Flash web site that stole heavily from Fast and the Furious...

If VQ35 crank and rods make it 3.25L, what else do they do to them?

I've seen a 3.6L TEPS built VQ25DET on a link on here. The Flash web site that stole heavily from Fast and the Furious...

If VQ35 crank and rods make it 3.25L, what else do they do to them?

Nope, sorry... not 3.2L... 3.5 crank and rods make it 2.8L (2771.42cc)

Here is the TPS.

It means you can adjust the idle to some extent and also get more air at startup? And perhaps slightly more throttle position at stall or when driving which will explain the slight differences we are seeing on the Informeter.

post-63525-0-44798200-1305173478_thumb.jpg

Here is the TPS.

It means you can adjust the idle to some extent and also get more air at startup? And perhaps slightly more throttle position at stall or when driving which will explain the slight differences we are seeing on the Informeter.

The difference could be that the Impul was able to adjust it slightly.

I will put the stock ECU back on and test in the next few days.

Cheers

Andy

They still use the VQ25det engine, but stroke it out using (at a minimum) VQ35de crank and rods.

Still doesn't explain how they get it to 3.6L :nyaanyaa:

As Scott said, to reach 3.6L they bore and stroke the VQ25det, then use a VQ35de crank and put in their own rods and pistons as per below

(ain't they puurdy :))

TEPS36LVQ25detpistonsandrods.jpg

I spoke to Jetwreck and he said his nismo ecu not problem under 3000rpm.

G-ZONE said throttle controller and remap throttle map is same performance.

Scotty have throttle controller but its not good work.(This means Scotty changed throttle map but he could not fix under 3000rpm problem)

How is Ks rom?

Ks rom do not change throttle map.

If Ks rom fixed under 3000rpm problem its mainly std map problem.

If Ks rom can not fix under 3000rpm maybe throttle map problem.

How is Ks rom?

Ks rom do not change throttle map.

If Ks rom fixed under 3000rpm problem its mainly std map problem.

If Ks rom can not fix under 3000rpm maybe throttle map problem.

All correspondence I had with Ks stated that they cannot remove the <3000rpm restriction.

The cam advance map on the Vmanage seems fine, as in it is advanced at stall. The problem is the throttle plate no opening and it doesn't matter what you do to get around it as airflow is the ultimate problem. It looks like there is only two ways around it, to run the stock turbo or to go the cable throttle route.

Craig still cant launch his car unless he spools the turbo up which takes a few seconds. The Nismo still limits the throttle at launch unfortunately.

If its just throttle problem how is install big throttle?

Air flow more than std throttle.

I think wire can not install with std ecu.

If you take out electric throttle how to adjust idle and idle up?

Think outside the box Toshi, the idle can be adjusted with the adjustment screw on the side of the cable throttle, im using an EA Ford one I think.

The stock ecu will go into limp mode which is 1200 revs, then the Emanage will take full standalone control = WIN. :thumbsup:

Enlarging the throttle will work to some extent but im just sick of the whole thing, I want full control of the air and attached to my foot. What's wrong with a throttle cable anyway?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...