Jump to content
SAU Community

Recommended Posts

hmm i might try that tomorrow then.

there is ignition timing and additional boost on the nismo - actually not sure about the boost increase.

well i know the arx MUST be tune differently as from factory it runs a few psi extra.. and who knows if nissan advanced abit of timing to compensate for the extra ass...

Getting back to informeter and modifying the signals from these 2 pots, when I made changes to increase opening from 80% to 90%, the informeter would read LESS than 80% (closer to 70% actually) and then the ECU would back off the fuel (cause it thinks I don't have the throttle opened as much as I do) so I would see the injector pulse width drop down (meantime I'm going faster) & of course the knock sensor would put an end to it pinch.gif I'm hoping for better results at the lower end of the spectrum though. There's more fuel at launch and that is where we want the benefit anyway soooo.... we'll wait & see.

seeing as i've got a wideband in maybe me n scott will also figure this one out. but im starting to think it may have something to do with the fuel map as Cihan cant tune the car under 3000rpm when in third, as if he floors it it will kick down to first and jump off the dyno..

so it could also be a possbility that the low end fuel map is muck, as mine does strange things according to the wideband, but once it gets to 3000rpm, ratio sits at about 12v and everything hammers

maybe we could talk Ian into sticking his spare motor on an engine dyno to see if Gihan can tune the emanage to suit! :P

Not that it would really concern Ian or I....but we do like to help when we can.

maybe we could talk Ian into sticking his spare motor on an engine dyno to see if Gihan can tune the emanage to suit! :P

Not that it would really concern Ian or I....but we do like to help when we can.

I think if the transmission has anything to do with it, just an engine dyno wouldnt work i dont think.. Cihan needs to do a track coughroadcough tune from standing still, to full ball in first. Maybe we can get around it with just that(i like to dream)

maybe we could talk Ian into sticking his spare motor on an engine dyno to see if Gihan can tune the emanage to suit! :P

Not that it would really concern Ian or I....but we do like to help when we can.

Now that's a generous offer :thanks: guys.

Edited by Commsman

just food for lhought guys

the voltage range on most tps's is 0-5V

when you hook up an ecutalk display you can configure it to show tps volts or %

but for the % to show correctly you have to calibrate it as WOT isn't actually the max range of the sensor

is there any way to calibrate your display thingos?

and has anyone run the throttle out of the car and seen how far the butterfly is open at 86%?

yeah we already know its a range calibration on the informeter, i mentioned that one page back. at 86% its WOT

thats not the problem. being BTW the ECU retards the throttle to limit torque, we want it back. at almost any cost :P

I reset the Voltage range for the throttle this morning on the the informeter and now see throttle in the 40% bracket when stalling. It was a very brief stall and not completed so this may be a little higher in reality.

I will try to get a proper number later today.

I reset the Voltage range for the throttle this morning on the the informeter and now see throttle in the 40% bracket when stalling. It was a very brief stall and not completed so this may be a little higher in reality.

I will try to get a proper number later today.

by doing the Throttle position reset or?

is there a way to do it in the informeter??

just food for lhought guys

the voltage range on most tps's is 0-5V

when you hook up an ecutalk display you can configure it to show tps volts or %

but for the % to show correctly you have to calibrate it as WOT isn't actually the max range of the sensor

is there any way to calibrate your display thingos?

and has anyone run the throttle out of the car and seen how far the butterfly is open at 86%?

VQ's have twin TPS signals, 0-5v and 5-0v.

The 36% at stall opening is the big issue, not the 86% once it opens.

Perhaps the issue at stall is just an input to the ecu from the brake. Maybe the nismo has this turned off but for those of us without "awesome", we could just cut the wire....

my thought exactly. i said it earlier but im not too confident in exactly which wire that is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...