Jump to content
SAU Community

Recommended Posts

Hi all,

I am sure this question has come up here a hundred times, so if you couldn't be bothered answering, I'd greatly appreciate if you could supply LINKS

to sites that will answer the question.

I'm looking at buying an R34 GT Vspec II but I'm not 100% sure that the differences are between the:

R34 GTR

R34 GTR Vspec

R34 GTR Vspec II

When I go to inspect the car, what are some pointers I should look for that tell me that it really is a Vspec II and not a Vspec or normal GTR?

Thanks all!!

Link to comment
https://www.sau.com.au/forums/topic/267422-r34-gtr-vspec-vspec-ii/
Share on other sites

COURTESY OF GOOGLE AND WIKIPEDIA

5th generation (1999–2002)

Fifth generation An R34-generation Skyline GT-R V-Spec

Production 1999-2002

Assembly Tochigi, Tochigi, Japan

Body style(s) 2-door coupe

Layout Front engine, rear-wheel drive / all-wheel drive

Engine(s) 2.6 L I6

Transmission(s) 6-speed manual

The GT-BNR34 (R34) Skyline GT-R and GT-R V-spec models were released in January 1999. The R34 GT-R was also made to be shorter (from front to rear), and the front wheels were made closer to the front. The valve covers were also painted glossy red, rather than dull black.

A new feature on the R34 GT-R is a 5.8" LCD multifunction display on the center of the dashboard, which shows seven different live readings of engine and vehicle statistics such as turbocharger pressure (1.2 bar max), oil and water temperature, among others. The GT-R V-spec model added two extra features to the display: intake and exhaust gas temperatures. Nismo Multi-function Displays (MFD)can be bought at an extra cost, they include a lap timer and an increase in boost pressure measurement to 2 bar. R34 rears are longer than previous models.

Like the R33, the new R34 GT-R V-spec models come equipped with the ATTESA E-TS Pro system and an Active LSD at the rear, while standard GT-R models come with the non-Pro system and a conventional mechanical differential. The V-spec model also had firmer suspension, and lower ground clearance. The V-spec model also included a plastic front air diffuser (covering the underside of the engine), and also a rear carbon fiber air diffuser, designed to keep air flowing smoothly under the car.

Another special model of the R34 GT-R is the M-spec. It was similar to the V-spec, but had special "Ripple control" dampers and a leather interior with heated front seats.

At the time of the R34's release, like the R32 and R33, Nissan released an R34 N1 model. The R34 GT-R N1 was equipped similar to the R32 and R33 N1 models - a homologation special. It was sold without ABS, air conditioning, audio equipment, rear wiper, or carpet in the trunk. The new R34 N1 was also given the new R34 N1 engine. Only 45 R34 N1 models were produced from the factory, 12 of which were used by Nismo for Super Taikyu racing. The rest were sold to various customers, mostly racing teams, and tuning garages.

In August 2000, Nissan released a newer V-Spec II GT-R model. The V-Spec II has increased stiffness in the suspension (even stiffer than the original V-spec) and had larger brake rotors on the rear. It also comes equipped with a carbon fiber hood, which is lighter than the aluminum that all other GT-R hoods are made from. Also different on the V-Spec II was an iridium center console and aluminium pedals. The seats were also made with black cloth rather than the gray cloth used on previous R34 GT-R models, and the amber turn lenses were replaced with white versions. From this point on the standard trim level GT-Rs and V-Specs also received these updates, with the exception of the carbon fiber bonnet.

In February 2002 Nissan released a final production model of the R34 GT-R called the Nür. Nissan also released a limited Manufacturer Special model designated the M-Spec. This came in two forms, the base M-Spec, and the Nür. The Nür was sold in 2 different models: the Skyline GT-R V-spec II Nür and the previously mentioned Skyline GT-R M-spec Nür. The Nür was named after the famous German Nürburgring racetrack, where the Skyline was developed. The Nür model featured an improved RB26DETT based on the N1 racing engine, used by Nismo in Motorsports. The V-spec II Nür is based on the regular V-spec II model, and the M-spec Nür was based on the regular M-spec model. Other than the addition of the Nür engine, the Nür models also included a different color of stitching on the interior trim, as well as a speedometer reading up to 300 km/h (186 mph).

http://www.skylinesaustralia.com/forums/Ni...GTR+DIFFERENCES

Read that =)

Also this is from Sewids post -

The GTR is the base model while the GTR and V-Spec were being made most cars came out of the factory as V-Specs.

V-Spec has added fruit such as:

- Carbon fibre rear underbody tray

- Intercooler intake temp sensor

- Exhaust temp sensor

- Upgraded MFD to show data for these two extra sensors

- Slightly different tacho (cant remember how exactly)

- Active rear diff (maybe on all R34 GTRs?)

- Faster ATTESSA computer (maybe on all R34 GTRs?)

The V-Spec II has all of the above plus:

- Carbon fibre bonnet

- Different rear brakes (very slightly different apparently)

- Black cloth seats (as opposed to grey in the earlier models)

- Aluminium pedal set

- Aluminium map pocket

- Aluminium faced CD player

- Firmer suspension (probably not 100% on this)

- Different radiator (plastic topped)

- Larger rear Nissan badge

- Updated MFD with extra functions such as a lap counter and possible data logging?

- Different front bar?

- Probably more

The M-Spec is basically a V-Spec II except for the following:

- Aluminium bonnet (same as V-Spec) with carbon bonnet option

- Different paint options

- Improved ride quality due to softer suspension

- Black Leather seats, hand stitched, heated

- a few other things that wrxhoon could probably add - I've compared my V-Spec to his M-Spec before but im sure im missing some bits

The Nur cars are different again.

The Z-Tune is nothing really to do with R34 GTR models.

What about weights, does anyone have any accurate info on the difference in weight between these models

not alot has been mentioned about weight between the models...

there isnt much difference at all between........

Series 1

Skyline R34 GT-R: 1540kg

Skyline R34 GT-R V-Spec: 1560kg

Series 2

Skyline R34 GT-R: 1540kg

Skyline R34 GT-R V-Spec II: 1560kg

however, There are specs on the M-spec, M-spec NUR & V-spec 2 NUR have a fair difference in weight

im not sure if this is a misprint or true weight, but this is whats been stated.

Skyline R34 GT-R M-spec: 1800kg

Skyline R34 GT-R M-spec NUR: 1800kg

Skyline R34 GT-R V-spec II NUR: 1780kg

not sure how much the N1 weighs though

I reckon it should be as follows.

Skyline R34 GT-R M-spec: 1600kg

Skyline R34 GT-R M-spec NUR: 1600kg

Skyline R34 GT-R V-spec II NUR: 1580kg

There's no way 200+kg was added.

yeah thats what i was thinking

i had an article on the M-spec model on the HPI magazine but i must of thrown it out. it probably said on there...

yeah 300kg is a bit way too much

  • 3 months later...
i've been constanly told by my customer that my v-spec 2 is a fake because its black and they dont come in this colour???

Your customer doesn't know the difference between his head and his arse because there were definitely black V Spec II's made.

Your customer doesn't know the difference between his head and his arse because there were definitely black V Spec II's made.

Badzzz huh +1 on black vs2's but jst in case ill go to my garage and double check mine lolz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...