Jump to content
SAU Community

Recommended Posts

they aren't too bad in person, the polished spokes go well with the chrome accents on the car. definitely can do better though.. maybe just get some 22's like this:

http://www.supraforums.com.au/forum/members-rides/58430-2002-nm35-autech-axis-stagea.html

they aren't too bad in person, the polished spokes go well with the chrome accents on the car. definitely can do better though.. maybe just get some 22's like this:

http://www.supraforu...xis-stagea.html

I can't stand stupidly large wheels normally; but that car makes me a little tingly in my wingly.:wub:

Don't worry too much what people think; everyone's different, but some higher profile rubber will sort out the proportioning issue, and most likely improve the ride.

Edited by Daleo

they aren't too bad in person, the polished spokes go well with the chrome accents on the car. definitely can do better though.. maybe just get some 22's like this:

http://www.supraforu...xis-stagea.html

Massive aside, I think someones dyno was being a bit generous if they made 180rwkw with only a fmic :whistling:

My ideal wheels would be 19" CE28N's :yes:

Massive aside, I think someones dyno was being a bit generous if they made 180rwkw with only a fmic :whistling:

My ideal wheels would be 19" CE28N's :yes:

DROOOOOOOOOOOOOOOOOOOOOLS...

Im going to stick with CE28 copies as my bank balance doesn't go far enough for the real deal!

I'll be joing the wheels club tomorrow. Picking up 4 big packages that have made their way from Japan! Won't have time to fit them up, so it'll have to wait a few weeks >_<black_lrg.jpg

19's SSR type F

In black.... I think that's the road I will go down. Solid black FTW!

I'll be joing the wheels club tomorrow. Picking up 4 big packages that have made their way from Japan! Won't have time to fit them up, so it'll have to wait a few weeks pinch.gifblack_lrg.jpg

19's SSR type F

Very nice Alex!

Can't wait to see these on!

I'll be joing the wheels club tomorrow. Picking up 4 big packages that have made their way from Japan! Won't have time to fit them up, so it'll have to wait a few weeks >_<black_lrg.jpg

19's SSR type F

What is the width/offset you went? :)

19x8.5 +22 all round.

For those playing at home, its exactly the same fitment as what BBenny has with His Enkei GTC01's. There are lots of photos of that round for refrence.

Picked em up, can't wait to have them on!

JDM Concept. Under 3k, pick up. Prices are on the website- good pricing (good service too) as far as I could work out, but there will always be someones second cousins sisters brother that got them cheaper in timbuctu, if you get my drift...

JDM Concept. Under 3k, pick up. Prices are on the website- good pricing (good service too) as far as I could work out, but there will always be someones second cousins sisters brother that got them cheaper in timbuctu, if you get my drift...

With tyres?

JDM Concept. Under 3k, pick up. Prices are on the website- good pricing (good service too) as far as I could work out, but there will always be someones second cousins sisters brother that got them cheaper in timbuctu, if you get my drift...

That's a good price then. I thought you might have got them ex Japan. Freight for a set of 19" wheels is over 1k alone! That's partly why I went with 18" as the freight is less than half of 19".

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...