Jump to content
SAU Community

Recommended Posts

  • Replies 218
  • Created
  • Last Reply

Top Posters In This Topic

cos was thinkn of running more (or is it less...i mean more negative) camber in so isnt this the part i need? just something like -3 top :S

Na man 33's have a diffrent setup all together.

If you already have a cusco style adjustable uper arm you will need an Ikeya adjustable lower arm. But I think the cusco style upper arm will allow plenty of adjustment.

Go to Just jap for all of the above

very interested in a track version and quite posably 2 pairs .

i will be happy to deposit money once i know the adjustment availiable.

feel free to pm me with the adj details and bank details at the same time

cheers

Tim,

lol, everyone has the same idea. every single bloody set of arms or bushes for 32 does not give anywhere near enough neg camber. the only way up till now was cut and shut factory arms to get you that nasty 5 degrees neg you want. but if johnny listens to me (and he will or I will ridicule him for life) these will be the best arms on the market. :) cure the binding/bush wear issues and the lack of adjustment issues in one hit.

righto status is that jonny is getting back to me with a manufacture time once i have that ill make a last call for deposits then ill hnd over your deposits to johnny and you will pay him the reminder when they are ready for pick up

pete

0448468884

Still haven't received a reply to my pm's mate....i would like to get a set of these,

expressed interest on the 26th of June.... i didn't get any bank details to make a deposit?

i don't want to miss out on a set of these great items

Z

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...