Jump to content
SAU Community

Recommended Posts

WOOP THE DAY HAS ARRIVED! Rob from Fibrecrazy.com hand delivered my R34 gtt 4 door bodykit last night for me about 10pm.

It's the first and mine of course will be the trial fit. Once it's fitted and painted they'll copy off mine so anyone who buys future kits get perfect bolt up fit and no filing or modifications.

VERY HAPPY WITH THE RESULTS!!!

Sideskirts - Startcurved and square up towards the back (stretched gtr style)

19052009177.jpg

Front bar is bomex as many before have gone with so i'll show the usual pic

Nissan-R34-TopSecret-Bomex-Frontbar.jpg

Rear bar (custom one) - full wrap around with bomex inspired look to match in with the bomex front bar. I call it the STYLIN kit hahahahaha It's a little bit uras, a little bit bomex i guess.

19052009175.jpg

19052009176.jpg

So what you think??? I'm stoked! Unlike the east bear the rear section is one whole bar and its not as plain as the uras, totally suiting my needs. Rekon Rob is going to sell quite a few of these puppies. :P

FYI for those who are interested in what i found out there so far

EAST BEAR KIT - $6-8K

4doorkit02.jpg

4doorkit03.jpg

URAS KIT - $1300 au

uras4doorkit02.jpg

uraas4door01.jpg

Post pics when its on the car.

I wanna see how they look.

Usually with R34 4 doors, I only like the factory Nissan Aero kit and the BN Sports, Vertex and URAS kits.

East Bear looks nice as well, similar to the Nissan Aero kit, subtle, clean and neat.

Post pics when its on the car.

I wanna see how they look.

Usually with R34 4 doors, I only like the factory Nissan Aero kit and the BN Sports, Vertex and URAS kits.

East Bear looks nice as well, similar to the Nissan Aero kit, subtle, clean and neat.

i too like the Aero kit's but finding 1 is the hard part.

hence I'm still looking

is the rear bar from "stylin" lower then the stardard one as thats the main issue i've found... standard nissan kit looks great but rear of car looks like it sits too high as rear bits don't keep the low look of the rest of the kit.

Otherwise yeah nice kit. Still prefer the URAS Type GT.

thanks guys for clarifying the whole east bear, cross factory, bomex, top secret thing. I'll go home n unwrap the front bar sarvo to see if its top secret or bomex. I'd say it'll be top secret, which is cool with me.

Lanky71 - Yep the rear bar sits lower especially through the mid area.

Gotta get her in to get it done over the next week or two, cant wait to see the results.

For me the key is avoiding commercially available kits that are the same on any car (ie the skirted uras kit sold for almost any car), im going for something simple, but at the same time a little unique. I'm pretty confident i have what i wanted. The only line im worried about is the sideskirts from the front bar throught to the rear as they start off curved.

  • 2 weeks later...
  • 3 weeks later...

whoever was looking for the factory nismo kit .. you can get the front bumper from vivagarage.com

dcimports in perth seems to kit out half their cars with this kit as well .. check it out with them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I am getting the same issue. Did you resolve it? I just got it after installing my new super coppermix and literally the same issue, new fork, new 18mm carrier, release bearing that came with the kit and replicated the exact same sound. 
    • If you like - I have the STL files so I can email em. There's a couple of gotchas (i.e the holes are not threaded so you might need/will need) to utilize some M3 melt-in threads for some of the points. However if you want to be super accurate, and are willing to remove your calipers and your SHOCKS it's a really good tool. You also might need to scale the part that measures the tyre width a bit wider. It defaults to a 7.5in tyre and I mean who is running that. Luckily with the magic of CAD this is very easy to rescale.
    • jeebus. glad you weren't under it while performing the stunt. Also thanks for the link to the wheel measurer, exactly what I needed
    • In the older stuff there were very significant differences 2wd to 4wd, for example Stagea had strut front end for 2wd and double wishbone for 4wd so it was not minor to swap. From poking around the 2wd v37, it *looks* like it might be more possible; some of the parts specifically have "2wd" stamped on them which suggests the platforms are more similar. You'd still want to start with a 4wd half cut to swap stuff from though. I'd suggest if you don't have a tune on the ECU you don't really need one on the trans either. Throttle mapping is in the ECU side (and you can always use a Roar Pedal if you want the throttle to actually respond to your foot), and really if you are happy with the stock power you probably accept the stock trans behaviour too....its all made to be "sporty" not racey.
    • So, updates. I have not washed the car since it came back from Tassie. I've driven it around a bit but not got around to actually sorting it out. I DID raise it because I cracked the rear bar leaving a hotel which was very distressing. Interestingly, the car drives more compliant now that it's raised a fair bit (5mm front, 15mm rear). Also noticed that my FR height was 10mm lower than FL. So that's now sorted out, too. I also bought this and had it printed: https://www.etsy.com/au/listing/1576422240/wheel-and-tire-fitment-tool-universal?ref=shop_home_feat_1&dd=1&logging_key=08f604d9fa4cc383550ba985e6ac85cd5cac7fbb%3A1576422240 Now, if I was smart I would have taken my brake calipers off to actually use this correctly but it was evident enough to me that in the region where the caliper was... there was nothing to hit suspension/guard/arm wise. So I'm going with "it'll be fine" after using the tool to hopefully very precisely measure the wheel clearance. Also while doing this, I had the very VERY bad idea of jacking one of the wheels/suspension arms up while the rest of the car was on jack stands. I did this to see how the arm would travel. This all was well and good until the car slid off the stands and went through a fence. So don't do that. Incredibly nobody was hurt and there was only minor damage to the rear bumper as the car didn't have far to slide, and had 3-4 wheels on it. The only damage turned out to be the fence itself which was easy to fix, and a little bit of damage to the fibreglass rear bumper trim. I had already planned to try a touch up paint kit to fix the time I drove into my garage door to see if it'd help in the interim before I get it fixed properly. I used the Dr Colorchip kit after looking online and seeing everyone talking about it. Yes it's made for chips and not huge broken missing pieces and I'll be 500% recommending it for stone chips after using it for stupid things like me. This took about ... 10 minutes and looking at the half assed photo the 30 second job I did on the bumper corner was almost perfect just by using the tiny little brush and painting it in. The sealact stuff to remove over-painting is really useful, so if/when I do it again I'll likely slather the touch up paint well over it and then clean it up with the cleaning solution. The wheels should arrive in a couple of weeks. I am still kinda confident after doing a stupid amount of measuring (and borrowing a set of 18x10.5+15) that they will not fit because I overlooked something, somehow and flew too close to the sun. ALSO R34 GTR guard liners do not fit on a GTT. I bought the undertray brake duct guides and had the wonderful problem of them not fitting my intake, my oil cooler and the liners themselves were even worse. Attempting to fit them won't work in general - You would have to cut them up as another poster mentioned as the bodywork is different on the GTT. At least I can try to resell them. So instead of cutting those up, I cut up my old already-cut-up GTT liners and extended them by using some PP plastic and drilling some 8mm holes for some nissan clips for the 'extra' bit. Because I was happy to cut them I was able to mount them pretty damn forward so I now have some semblance of guard liners, and the brake vents seal the bumper from the bottom. It sort-of-looks like this, to give some idea - If you look at the GTR and then the GTT this is when I realised that I needed to seriously measure as the inside of the rim area is entirely, entirely, entirely different and could not take any internet measurements for granted.   
×
×
  • Create New...