Jump to content
SAU Community

Recommended Posts

Sydney to phillip island and back towing with all tools and spares as well as 100ltrs of fuel and 3 blokes in the car

falcon g6turbo

post-8233-0-17057100-1326456763_thumb.jpg

was using 91Oct so reckon could have gotten it lower

race car on the back?

if so that is farken impressive

evil they all pull soccer mums... but they are all pretentious high maintenance bitches

My twin turbo 4.0L 350z gets 18L/100k

It doesn't have a tow bar and I cane the crap out of it, it doesn't even know if there is a hill just powers along in 6th.

Pointless comparison but kinda suits the way this thread goes from time to time.....

where are the soccer mum pics wtf!!

Dan, ive had a few beers with Harry, it was XXXX, beer was ok, but Harry is good to have a beer with.

only issue there was Druncan wouldnt buy us shouts cause he was saving for rebuild # 43

No no! It was only meant to be new turbos at that stage... Poor drunk man... Although, Drunkman is good to have a beer with too!

Sydney to phillip island and back towing with all tools and spares as well as 100ltrs of fuel and 3 blokes in the car

falcon g6turbo

post-8233-0-17057100-1326456763_thumb.jpg

was using 91Oct so reckon could have gotten it lower

That's amazing economy for a vehicle that is also "fun" to drive!

Very impressed I am.

Truthfully though, with all due respect, and I mean this is the nicest possible way...... Patrols drive terribly, they really do. There's only so much a brother can do with a live front axle.

:mellow:

bah, man up. IFS Is For Shopping... Live axles are for getting you places.

so you get the ocassional shimmy on bumps mid-corner... and some times get the patrol wobbles at ~90kph. That's no problem, just don't do 90kph! :thumbsup:

Truthfully though, with all due respect, and I mean this is the nicest possible way...... Patrols drive terribly, they really do. There's only so much a brother can do with a live front axle.

:mellow:

great tow car... but farken uncomfortable with now leg room

Would not call the g6turbo a value for money option as its 60k odd new but compared to the q7 its a bargin.

ahh i though they were 10k for a 3 day old one?

Mine drives fine, I like driving it than my 2008 D40 I had, feels heaps more solid. And goes around corners pritty dam well, been testing it put the past 10month driving over the bells line of road every week.

There's drivers and than there wheel holders...... Man up buddy

Mine drives fine, I like driving it than my 2008 D40 I had, feels heaps more solid. And goes around corners pritty dam well, been testing it put the past 10month driving over the bells line of road every week.

There's drivers and than there wheel holders...... Man up buddy

haha, I must be a wheel holder. :thumbsup:

I don't understand why people take criticism of their chosen vehicle so personally, maybe you should "man up buddy". :rolleyes:

I've had my fair share of "man's" vehicles,.... one was a lifted 'Cruiser ute on 33" muds and twin lockers, it drove like shit. It actually drove a bit more shit that the bog-stock 1998 GU wagon I owned briefly. Yes, they're completely drivable. No, they are not a paragon of refinement or driving joy.

If I were to be towing a large trailer over the Canning Stock Route, or off-raoding and needed maximum wheel articulation, I'd likely chose a Patrol.

That does not, however, make them "the" default choice for those who want for a good daily driver that can also tow their race car interstate comfortably time to time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...