Jump to content
SAU Community

Recommended Posts

That is why I paid $13k for an LPG powered Patrol, same thing running diesel would have been $23k+, and I feel comfortable with 2.5t in front of the Gtr. Sure there is no point spending a million on a tow/daily but having 2t of pride and joy behind a 1.8t tow car (plus tools etc) is begging for trouble, and if your tow car is overweight I am guessing your load is not covered by insurance either..

A Falcon would be the fallback tow vehicle for me, once some business is sorted then I'll know how much $ is available. Spent heaps on the track car, now it's time to get something decent as a dual purpose only one vehicle thing. Could get a gearbox chewing BMW X5 or Merc dodgy everything SUV if 'style' was the main goal :)

That last pic... Farken hell!

If anyone is looking for a falcoon tow car, hit me up, just moved house and it won't go down the side of the driveway I need it to while empty yet alone with a car trailer. (major advantage 4WD, ground clearance)

I use a 92 EB Falcon wagon to tow 2 tonne of race car/trailer plus tools/fuel etc in the back of the wagon to race meets for last 2 and 1/2 seasons. It's a 4L straight 6 which is a rare 5 speed manual (was an ex Ag department tow vehicle) and done well over 500K+ in its long life. I wouldn't say it does the job easily but it does the job and hasn't let me down yet. What was needed to get it over the line as a tow car was: 1. Properly rated tow package - Ford item is only rated to 1500kg 2. Air springs on rear - essential to keep car level (and stops the mud flaps doing any work!) 3. Electric brakes on both axles with override system - legal requirement if over 2 tonne which pretty much any Skyline will be on a trailer. My car weighs 1250kg but trailer is 700kg. Add a spare trailer tyre, some spares inside car and couple of jerry cans and well over the legal 2 tonne limit for single braked axle trailer) 4. Stay out of 5th gear - is always going to be the first one to snap! Is being retired once my new Jeep Grand Cherokee CRD arrives!! (This week hopefully after 4 month wait!)

post-67248-0-80484900-1344256430_thumb.jpg

Edited by Nissanmania

wheel there ya go

keep it under two tonnes or ya f**ked

15.2 All other trailers that do not exceed 4.5 tonnes ATM

These trailers must be fitted with an efficient brake system that complies with ADR 38/-. Except for over-run brakes, all brakes must be operable from the driver's seat of the towing vehicle.

For trailers up 2 tonnes GTM, an efficient braking system is considered to have brakes operating on the wheels of at least one axle. Over-run brakes may only be used on trailers that do not exceed 2 tonnes GTM.

Every trailer over 2 tonnes GTM must have brakes operating on all wheels. The brake system must cause immediate application of the trailer brakes in the event of the trailer becoming detached from the towing vehicle. Under these circumstances, the brakes must remain applied for at least 15 minutes.

You guys should just get lighter cars ;)

Trailer is 420kg's and the car is around 550kg's wet. I was previously towing it with my AU Falcon, which does it with ease. Have also towed it with a 2010 Jeep Cherokee, and obviously it's no sweat.

As I now require more space for spares I've just picked up a Q7 4.2 FSI with air suspension and a 3500kg towing capacity. The space in the back for parts is ridiculous, and should do the job very nicely indeed.

well after moving to perth and towing my R32 gtst behind my 2002 holden rodeo with 3.2 V6 manual petrol, i can catagoricaly state that it is not a great tow vehicle. it got 300k's to a tank, and with a strong headwind at one point about 250k's. it worked out to almost 20L/100kms.

Probably not to bad for towing to the local racetrack, but shithouse over long distance. technicaly it is overweight by a couple of hundred kilo, as the rodeo is only rated to 1800 kg's.

Its a great car in a lot of other ways, and im not going to get rid of it, but i wont be towing the 'line very far purely because it costs too much.

I use a 92 EB Falcon wagon to tow 2 tonne of race car/trailer plus tools/fuel etc in the back of the wagon to race meets for last 2 and 1/2 seasons. It's a 4L straight 6 which is a rare 5 speed manual (was an ex Ag department tow vehicle) and done well over 500K+ in its long life. I wouldn't say it does the job easily but it does the job and hasn't let me down yet. What was needed to get it over the line as a tow car was: 1. Properly rated tow package - Ford item is only rated to 1500kg 2. Air springs on rear - essential to keep car level (and stops the mud flaps doing any work!) 3. Electric brakes on both axles with override system - legal requirement if over 2 tonne which pretty much any Skyline will be on a trailer. My car weighs 1250kg but trailer is 700kg. Add a spare trailer tyre, some spares inside car and couple of jerry cans and well over the legal 2 tonne limit for single braked axle trailer) 4. Stay out of 5th gear - is always going to be the first one to snap! Is being retired once my new Jeep Grand Cherokee CRD arrives!! (This week hopefully after 4 month wait!)

Ahh, you won't regret the new car. My 8 month old diesel Grand is for sale now (financial reasons)!! any takers?

Just another reason that GTR's suck. They're over 2k on a trailer. Nearly 3k if you carry enough engine oil to keep the shitbox full for a day's sprint......

:P They are cool!

well after moving to perth and towing my R32 gtst behind my 2002 holden rodeo with 3.2 V6 manual petrol, i can catagoricaly state that it is not a great tow vehicle. it got 300k's to a tank, and with a strong headwind at one point about 250k's. it worked out to almost 20L/100kms.

Probably not to bad for towing to the local racetrack, but shithouse over long distance. technicaly it is overweight by a couple of hundred kilo, as the rodeo is only rated to 1800 kg's.

Its a great car in a lot of other ways, and im not going to get rid of it, but i wont be towing the 'line very far purely because it costs too much.

A friend has a 'cruiser and averages about 25l/100km towing his Radical, though it is an enclosed trailer so the aero would be rubbish.

You guys should just get lighter cars ;)

Trailer is 420kg's and the car is around 550kg's wet. I was previously towing it with my AU Falcon, which does it with ease. Have also towed it with a 2010 Jeep Cherokee, and obviously it's no sweat.

As I now require more space for spares I've just picked up a Q7 4.2 FSI with air suspension and a 3500kg towing capacity. The space in the back for parts is ridiculous, and should do the job very nicely indeed.

you could use an excel to tow the radical phunky.they are so light

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...