Jump to content
SAU Community

Recommended Posts

See i told you they'd make a difference!

I have the Gordgee ones on mine and the build quality is well the best you can get. And the support was great too. They came in a RHD kit and with RHD instructions. There were 10 wires 4gauge each.

I actually wrote down all the lengths of them when I got them so I can duplicate them if needed, but I forgot to post them up and have since lost the measurements... sorry! I don't think it would be difficult to make some up yourself, but if you don't mind paying the 230 odd dollars to get them as I said they are great quality.

When I installed them, I installed them in stages to see where the difference was made. I actually drove around for months in between and got a good idea if they made any difference. No I didn't remove any cables between stages.

1) I installed the six cables that go round the block and chassis first - no difference.

2) Then I installed the cable that goes from the block to the negative battery terminal - night and day change. Car started quicker, more responsive throttle, gear changes quicker(on the CVT)

3) Cable between the ECU and TCU - Didn't notice any discernable difference

4) Cable from the block to the transmission - No change again

5) Cable from the block to the ECU - No change again

So, if I was to build them myself I would install the cable that goes from the engine to the negative battery terminal first and see if it made any difference and maybe leave it at that.

If someone is willing to do a test when they receive their batch of cables, could you install just this wire first and see if it makes a difference? It's been bugging me for a while now :laugh:

Cheers.

  • 4 weeks later...
  • Replies 212
  • Created
  • Last Reply

Top Posters In This Topic

I bought a generic grounding kit from HK (well, bought it 3 years ago for about $50 AUD) and it comprised of 5 cables, but reading this thread, it seems that I am missing 3!!! (in order to be just as good as the US kit)...

I have wired up mine a bit differently though....And I'll take a few pics to show you (after tomorrow's VIC Meet). The only cable I think is an 'essential' is the tranny one, so I am gonna find another wire to do it.

can you post pic on yours??

those who installed the tranny cable, just wondering how far up you need to squeeze underneath?

With the car jacked and on stand, is it easier to squeeze in from the driver side (since the instruction said it was on US' passenger side),

or is it easier from the front on?

  • 5 months later...
can you post pic on yours??

those who installed the tranny cable, just wondering how far up you need to squeeze underneath?

With the car jacked and on stand, is it easier to squeeze in from the driver side (since the instruction said it was on US' passenger side),

or is it easier from the front on?

As above, what's the best way to install the tranny cable? I should probably get some jack stands first but perhaps it can be done with just the car jacked up? Everything else installed pretty easily, haven't gone out for a drive yet tho but is an ECU reset really needed before any potential changes appear? thx

  • 1 month later...
  • 3 weeks later...

Fitted the earth kit today and found out that the AT wire is too short and cant reach to the transmission on my V35 250GT!

Its about 5cm too short.

So for now i leave the AT wire off and all other wires fitted with no problem.

The instructions came with the kit is easy to follow but the photos would be great if is in colours and not just black and white.

Anyone fitted the AT wire to the transmission?

Here is a photo of the kit fitted:

IMG_4533_Medium.jpg

Edited by Son Gokou
  • 2 months later...
  • 2 months later...
  • 1 month later...
  • 3 weeks later...
hey guys i bought the sxexcx kit and i installed it al but just the at wire i cant seem to find where to the tranny it connects, any help? - or a pic would be awesome too.

On the transmission dipstick, use the existing bolt.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...