Jump to content
SAU Community

Recommended Posts

Its pretty hard, more than just taking the turbo itself out.

You'll need a NA exhaust manifold, NA induction pipe, NA ecu, the car will still be registered as a turbo and probably illegal anyway, etc.

Your best bet would be to stick it in a shed for the year and buy yourself a really really cheap car while you wait.

Edited by sneakey pete

Good to see your trying to do the right thing and not just hope you don't get caught. I second the idea of garaging the car for a year and buying a crapbox as a daily.

The amount you would spend on an NA conversion would easily get you a car that would last a year. And you would be able to work on the r33 throughout the year so its even more awesome when you are allowed to drive it.

Been talk about this in another thread. Can't you just get an old blown turbo, rip out the wheels and shaft, find a suitable bolt / nut / washers and put that through in it's place.

Carry a heap of photos of the changeover on your phone for the cops - the car is still going to have GTS25t badges on it so they are going to pull you regardless. Let them drive it if they really don't believe you...

Been talk about this in another thread. Can't you just get an old blown turbo, rip out the wheels and shaft, find a suitable bolt / nut / washers and put that through in it's place.

Carry a heap of photos of the changeover on your phone for the cops - the car is still going to have GTS25t badges on it so they are going to pull you regardless. Let them drive it if they really don't believe you...

lol id like to see that work

but ye cheaper to get a crappy rolla to rool around in for a year and work your car for the year

I have to say i agree with putting it in the garage and just buying a junker to get around in for the year. You would be better of picking up an R31 cheap it would go better than your 33 with the turbo taken of.

Been talk about this in another thread. Can't you just get an old blown turbo, rip out the wheels and shaft, find a suitable bolt / nut / washers and put that through in it's place.

Carry a heap of photos of the changeover on your phone for the cops - the car is still going to have GTS25t badges on it so they are going to pull you regardless. Let them drive it if they really don't believe you...

I doubt that would work. The turbo charger would still be fitted to the car, good luck explaining to the cops that it actually has no working parts. And anyway the car would run like a shot dog.

you could unbolt the turbo but you will end with a car slower than a hyundai excel. a turbo motor isn't a NA motor with a turbo bolted on. it has lower compression. that is why at low rpm/off boost will NA motor will be quicker than a turbo.

Yeah good luck telling the cops that your car registered as a GTS-T is actually non turbo now. See how far it goes.

Ring up the RTA and ask, but I daresay that any workshop offering to do an N/A conversion on a turbo car for P platers is simply parting fools with their money.

And ugh anyway, N/A Skylines are slow enough, imagine one without a turbo! I think my GF's Datsun would be faster lol.

Yeah would be a bit of a pig... I remember the days when 9:1 was a high compression engine though!!

I guess I am just used to getting more respect from cops these days - can argue a point with them without ending up in the back of a divi van. I forget how I used to get treated.

God another one of these threads. It doesn't matter if you rip the turbo out. The car's VIN plate says it is a turbo vehicle, it doesn't matter if you convert the whole car to a non turbo, you will still get fined.

God another one of these threads.

Hit the little [x] on your browser the next time you come across something you don't like. Forums exist for discussion.

It doesn't matter if you rip the turbo out. The car's VIN plate says it is a turbo vehicle, it doesn't matter if you convert the whole car to a non turbo, you will still get fined.

He said he only has 1 year left - if he is in Vic the power to weight ratio still applies for P's issued before 1 July 2007.

God another one of these threads. It doesn't matter if you rip the turbo out. The car's VIN plate says it is a turbo vehicle, it doesn't matter if you convert the whole car to a non turbo, you will still get fined.

Exactly. Its still illegal.

Thread closed.

There are more than enough threads on this, please use the search function.

Thanks.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...