Jump to content
SAU Community

Recommended Posts

  • Replies 372
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I have to ask the silly questions :P

so as I understand it, it's $320 per kart, so if I have say 4 drivers it would be $80 each?

2nd question is for those that have done the race before, how many 'forced' pit stops are there i.e. for fuel, etc. and how many times did you have to stop in the race? I'm just trying to work out how/when driver changes should be done.

I have to ask the silly questions :wub:

so as I understand it, it's $320 per kart, so if I have say 4 drivers it would be $80 each?

2nd question is for those that have done the race before, how many 'forced' pit stops are there i.e. for fuel, etc. and how many times did you have to stop in the race? I'm just trying to work out how/when driver changes should be done.

Correct for the kart question, but 4 drivers would put you at a dis-advantage as it's an extra 2 pit-stops to change drivers. Not having done this before I can't answer the other question, but the driver change should be in the middle of the race so both drivers have an equal amount of time out there, paying the same amount of money after all :P

If you veer off into the dirt you will get a flag waved at as just as you PASS the pit lane (for some reason) meaning you have to pit for a chain re-oiling, keeps dem inner working sprightly.

2 drivers is best, you will realise that time flies when your on the track and 22 minutes per driver, with 4 drivers is 8 minutes less track time than we had at the first outing.

Edited by Topaz

2 drivers sounds good, but I don't think they would be in it to win it so to speak, so my options are to find someone that wants to do it competitively or go there with a few mates and perhaps have a bit of fun rather than all out attack, in which case having many pit stops won't be of any real concern.

Correct for the kart question, but 4 drivers would put you at a dis-advantage as it's an extra 2 pit-stops to change drivers. Not having done this before I can't answer the other question, but the driver change should be in the middle of the race so both drivers have an equal amount of time out there, paying the same amount of money after all :)

There's not too many people who can handle 45min in a Kart that is vibrating to buggery, so you'll find even with two drivers you'll pit a couple times each.

There's not too many people who can handle 45min in a Kart that is vibrating to buggery, so you'll find even with two drivers you'll pit a couple times each.

True that!

I spent 28 minutes in the kart at the first event and does tend to make the body hurt.

However, having Mike as the *cough* team boss, i was in no position to argue with him.

(Have you seen the size of him??????????)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...