Jump to content
SAU Community

Recommended Posts

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

AVCR

it's only shit if you don't know how to use it... been running mine for years perfectly without a hitch...

but anything from hks, blitz, apex etc should be fine

LOL. yeah sweet mate, catch ya there buddy.

AVCR solenoids are not consistent for high boost applications, end of story.

AVCR is the worst ever..

I use a GiZZMO MS IBC which I picked up brand new for $300.. works perfect, ran it on both external and internal gate setups (1.3 bar) and no issues at all. Awesome boost curves all day and very similar to the BLITZ SPEC R

If you don't mind spending the cash then go BLITZ SPEC R, if you want to get something just as good for half the price go a GiZZMO MS IBC

I have boost grapghs for the MS IBC if you wanna see :)

Not to hijack or anything but its a good thing I read this thread first basically I'm on the market for one as well just got myself a PFC so I was just planning to get Apexi's PFC Boost Controller for convenience sake and i don't want another doo hickey on my dash, but because that uses the same solenoid as the AVCR I'm guessing that one is shit too?

Appreciate any advice guys.....

P.S. @Hamish...When is this Buller thing going through man???...Anyone up for duck meet next week?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ha, I've never pressed the X in all these years incase it removed the notification for all Admins
    • I don't know, I've never done it that way, but 1. While it is an interference engine, there is still clearance between the valves and the piston at all points in the regular timing cycle 2. There is not a lot of distance before you can't catch the top of the valve stem any more I don't know if 2 is greater or less than 1. But 3. If it doesn't work out you are f**ked, engine is coming out to disassemble so it is a big bet.
    • Semi slicks are horrible for road use, just use a high performance road tyre unless you really need the maximum grip. Noisy, unpredictable (amazing, until they are not), expensive due to very high wear and not good in cold and particular wet. And yes, it is a thing to store cars on stands instead of tyres if you know they are going to be parked up long term.....but who ever realises that a short park is going to stretch into years before it is out again!
    • I know in Australia you'll definitely get above 30c. Parked in the shade in Summer you'll be above that. 😛 But in cooler climates, you might get that warm driving on the highway for a bit, but you'd never get to full heat temp. I'll try and find some of my historical tyre temps between Aus summer and winter (be aware immin the warmer area of Aus too.)
    • I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
×
×
  • Create New...