Jump to content
SAU Community

Recommended Posts

slip them a fifty!!!!!!!... YOu will find the world revolves around money (well at least most human lives anyway)!!! You will find all your problems will Disappear... NOTE: Also works with corrupt traffic police, just be careful about the manner you go about it (to avoid being done for bribeing police officer)!!!!!!

Well I just got my car through Regency on the 2nd attempt. From my experience, so long as you fix everything from the first time round you should go through easy. The first inspector I had was a bit of a bastard. The second guy I had was real nice and laid back. Seems luck of the draw. Now I better head to the garage to start puttin back all the aftermarket bits again .... *grin*

has anyone have to have an exempt from complance plate(road worthy check) done?? what kinda stuff will they check? i have a few bushes that needs replacing? will they be harsh on that kinda stuff? a 1-2 oil soked seals. 1 ripped boot on my steerinig rack? is any of that stuff a major thing to get thro a road worthy?? whats the best thing to do with th turbo timer? should i hide it in the dash some how or have it taken out?

  • 3 weeks later...
I doubt a cop opening your bonnet roadside without a search warrant is legal? Can anyone comment on that?

TEp they can look up your ass if they want dude don't kid yourself, if they can make a dollar from you they will, if you want to get away with something go commit a real crime.

just took my WA registered GTR through Regency to get SA plates, no problems at all. Now they have separated the "full pit inspection shed" from the "identity check shed". The new shed is a few blocks away, and i found everyone there to be pretty cool.

Basically you go to the main office, get your forms and they tell you to take the car to the new inspection location. Once its checked you go back to the main office and process the forms and get your plates.

I made everything as stock as i could. I was surprised that no request to remove the kickpanel was made. No inspection of the turbos was made either (you can clearly see HKS on them). He had a quick look at the tyres, had dished jap 18's on, and that was it. Basically for the ID check i would say theres nothing to worry about so long as you remove the obvious mods.

  • 3 weeks later...

Hah, just took my car (not a skyline, but we are all brothers in the japanese car game ;D) down there. There was like 4 guys looking at it and writing crap down. Apparently the "This is not a roadworthiness inspection" they write on the back of the form is a load of crap.

Non-compliant engine fitted

Emissions to comply with ADR

Steering wheel

So, what does "Non compliant engine fitted" mean, and how do I fix it? Also, I didn't think we did emission tests in SA, is there a place anyone knows of that can adjust my ECU to make it emission legal, and test it on the spot? The car has a haltech. Luckily they couldn't find it.

Also, there are only a couple of items, in anyones experience, if I take it down for an inspection will they screw me for more stuff? I of course have a bigger intercooler (A-spec one is like an air-con radiator) and piping, larger turbo, the stock air box has been moved. Additionally the wheels are not the standard wheels, although not much bigger, and the suspension is different. Do they ping you for strut tower braces? What about a/m shocks? It has koni's, but surely shocks aren't a big deal?

So, because I was defected at the inspection centre and not by a cop, will they be softer on me? I thought regency was a punishment.. but maybe it's just a great big revenue raiser. Maybe I'll move to WA. Pah.

Ha, when I was there a guy had a van they defected for tint. It was crazy, they even said he could paint the windows over or have curtains, but tinting them was illegal. Man, f**k transport SA and their revenue raising.

Sounds like you are in a world of pain.

Emissions testing is BIG DOLLARS, pass or fail.

If you fail, same price again next time.

By non compliant engine fitted, do the numbers match the car?

Has it had an engine transplant?

Getting it through with an aftermarket turbo is going to be virtually impossible.

Also, just because it's not on the list this time, doesn't mean they won't pick it up next time. I know someone who went to regency to have 3 defects cleared, and had another 10 added.

Probably not the news you were hoping for.

Yes, but the answer I was expecting. It's ok, I have the stock tiny turbo, just need to get a fitting kit. Are you in adelaide chops? I didn't think SA's emission testing was as expensive. The engine numbers match the rego, I made sure of that before I bought the car, but it is a low km import engine. Pretty sure that the J engines have the same codes as the A.

Yeah, it is a big world of pain. My beautiful car.. defected! Bahhhhhhh

Your best bet may be to sell the car to a wrecker and start again.

Your car needs to be STOCK when you next go back to Regency, otherwise they will only hit you with more defects. That includes the engine, intercooler, steering wheel, turbo, ecu etc. If it isnt they will only send you off with a bigger list of defects.

If you can make it all stock and get it through, then you could refit the good bits on again.

As far as I am aware there in no-one in SA (well perhaps Mitsubishi) that can perform the emissions test you require to an adequite standard. It isnt even worth considering this path.

Are you seriously telling me that if they have hit me with "emissions to comply with ADR" they have #$@ed me in the arse? If this is the case I am going to spew blood at my member of parliament. How can they have the authority to require me to spend $3000, repeatedly, to get my car registered? Has anyone here got slapped with emissions before?

Selling this car to a wrecker would be a massive loss! I wonder if my insurance covers "regency being unreasonable", causing the car to be written off?

You have a car with a non standard engine fitted.

If this were done in SA, in order to get it registered with that engine, you would have to prove it complied with the emissions standards applicable to that vehicle.

It's one of the perils of doing engine swaps unfortunately.

What car did the current engine come out of?

If this car was sold in Australia, then there would be emissions data for the STOCK engine (including stock intake and exhaust) that may satisfy the requirements.

If not, it will be very hard and costly.

What's the car worth?

I'd say you're looking at the best part of $10k to get it on the road in SA unfortunately.

Possibly the easiest/cheapest way would be to buy another stock one, swap all the bits over to get it on the road, then go from there.

i would just make it look as stock as possible, go back and ask them to explain what it all mean and what you have to do, Nicely!!!

thay might scrap some and hit you for more easily fixed ones.

once they defected me for no air pump, extactors, non compiant mags, brakes and too low!

went back diddnt change a thing and he let me off for all of them!, mind you it took me 4 times to get threw with my exhaust, in the end they diddnt charge me till i passed... [he told me to pack steel wool in the mufler] i got a young dude, was telling me what to do to get a 13bt thew aswell.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...