Jump to content
SAU Community

Recommended Posts

For turbine wheels update We can change that to GT2860 steel wheels with turbine housing re-profile and wastegate porting for $700 per turbo.

are these the same as the -5 turbos?

Idential specification. In sleeve bearing.

Just to avoid confusion for others, putting ideal spec wheels in the stock housings won't make it the same as -5 turbos because the -5 turbos use a 0.6 compressor housing and 0.64 turbine housing.

Just to avoid confusion for others, putting ideal spec wheels in the stock housings won't make it the same as -5 turbos because the -5 turbos use a 0.6 compressor housing and 0.64 turbine housing.

So even more lag

So even more lag

I'm still not 100% sure what stock A/R turbine housings are on the stock turbos but most ppl say they're .48 or something. The stock compressor housings are .42. The 707160-9 wheels would prob work better in the factory machined housings.

A friend of mine did this a few years ago. He claims it has less lag than a set of -7s, but that was several years ago, so I can't really give you any more details than that. A turbo shop in Townsville (John Patrick) did the job for him.

Well. as soon as steel wheels are in. noticeably more lag. Drove N1 and Normal R32, defiantly be able to tell which one's what. Bigger turbine housing will help making more power with more lag, its only a 1.3L 3cyc engine per turbo. I think machine -5 to stock housing would be a less laggy option for up to 350rwkws (I've seen 345rwkws).

So even more lag

So put correctly sized -9's on there for 330-340rwkw if that is what you want.

Just had a look at the stockies

.42 front and .48 rear

does this mean it wont flow as much as a -5s (.64 a/r) after hi-flowing?

No where NEAR what "true" ball bearing -5s will make.

You are basically putting a turbo designed to be in a certain way, into a set of restrictive housings.

You run into potential issues like:

will not make power easily, require fair amounts of boost for the power, create lots of backpressure and potentially higher intake temps for the equivalent power level.

Cutting short by going a sleeve bearing rebuild in restrictive housings

vs

Ball bearing turbo, correctly designed housing/wheel combo

It's a GTR - if your too cheap to afford turbo's to do it justice, begs the question IMO.

With the brand new price of Genuine Garretts these days, rebuilding stock GTR turbos IMO is a thing of the past

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...