Jump to content
SAU Community

Recommended Posts

Matt, worry less and enjoy more. There are plenty of cheap sh1theaps you can but with warranties, airbags, ESP etc etc etc (I've got one!) and you can drive them daily without concern. You'll drive happy knowing you've got your beatiful sports car in the garage waiting for the right moment. As for the R35, well I'd rather yours personally. There is so much more good than bad in what you've done.

Hi guys, (Sheriff Wan; elrodeo666)

I anticipated my comment about 'regretting not buying a R35 instead' would ruffle some feathers. I guess I have not had the chance to learn to unleash the full potential of what I have built yet. YES, I concede that I really NEED to take it for a 'proper' drive, or at least be a passenger with a competent driver to see what the car actually is capable of.

Also, please let me clarify that I am not at all disappointed at the way the R34 has turned out. Far from it, its the most unique and best damn car I have ever owned and I don't think I will trade it for anything else for a long while.

I guess I am just lamenting on the fact the performance of a heavily mod R34 is not as easily accessible to the average Joe driver like myself, as compared to a R35. The R35 is like 'point and shoot' and you are already going at warp speed. I have been practising a bit to launch my car properly and I guess I can hook it real right maybe once or twice in half a dozen attempts. Other times, it bogs, or I am worried that I will fry the Nismo clutch. Then there are those additional little gripes I have about an 'old' car, like those faded rubber seals, and annoying creaks and rattles from the interior plastics and trims, which feel so flimsy Then there is the warranty issue with all these aftermarket parts, or more accurately, lack of warranty because everything was imported through a private importer. What if the V Cam control module malfunctions? etc. The only comforting thing is at least I know the engine has been screwed together properly by Racepace. Also, going fast on twisty roads without the safety blanket of driver's aids such as traction control, anti skid, electronic brake force distribution etc can be quite disconcerting. Lastly, the amount of soot and fumes that exit the exhaust necessitates a clean or polish of my white bumper every time, otherwise a few days of leaving the fuel residue would result in a permanently yellow bumper. I think this is also wearing me out a bit. I thought the V Cam would make the engine burn cleaner, unfortunately it has not one iota of differnece compared to my original non V Cam RB.

I can understand why some journos have labelled the R35 soul-less, beacuse its so easy to drive; then I guess my mod R34 most definitely has 'soul', I just don't know if its the 'Devil' lurking underneath. ;)

Cheers

Matt

there is so little that can be added to this thread really... it kinda has everything anyone on this forum could ever dream of (including the house :))

few things though

- Detail at Final Inspection. Think of Damian as the 'Ben' of the RB26 world. Won't find a better detailer this side of the hemisphere. A couple layers of Final Inspection 'Seal', topped perhaps with some Zymol Royale ($18K wax) and after a drive, you'll just have to high pressure rinse, and all that soot/dust will just fall off the rear bumper. Trust me, Damian is as pedantic about detailing as Ben is about GTR's.

- If you're worried about soot/richness, thought about E85? Runs very clean. And E85 on this setup? If you're scared now..... :)

I know what you mean about learning to push the car, worrying about things braking, worrying about smacking it into something without the electronic aids, etc. But i would HIGHLY recommend a Driver Dynamics track day. I just did my 2nd one at Sandown on Sunday and basically you get about 20mins track time per hour (a lot of time) and you can choose to either a) go out alone b) go out with an instructor c) go out with the instructor driving and you passenger. The instructors are very experienced, lots of race/rally time between them all and i gave my car to an instructor to drive 1 session as well... dear son of rajab, at his claimed "50%" effort you quickly realise how much more capable the car is than we would otherwise perhaps give it credit for. And exponentially more so with your GTR. Check out the Driver Dynamics website, and their calendar.... then let me know what day you're going so i can come and watch and steal a passenger lap :D

I can fully understand about being concerned with testing the limits of your car... i'm concerned with my measly 285rwkw GTT! let alone the power you have. But you gotta have faith in the setup. You have literally the best of everything, and perhaps the most important aspect, PLENTY of braking and stopping power. The AD07's were an outstanding tyre, and i would go AD08's in a heartbeat if i had the $500 a corner budget needed to get them. Fantastic, fantastic tyre.

A phenomenal, phenomenal GTR mate. You have left absolutely nothing to chance, and with a bit of time behind the wheel on a track, and a bit of instruction, i'm sure you'll come to realise the 34 was the correct decision over the 35.

Truly one of the best world wide. Congratulations :D

oh, don't worry about this launching business. This car is meant to go, stop and turn.

Thank you for your kind and encouraging comments. I really get a lot of satisfaction sharing my experience with everyone.

I hope to feature the car in a performance automotive magazine at some stage, perhaps High performance imports; Autosalon magazine or Hot4s. Does anyone have connection? Please let me know.

Cheers

Matt

PM 2RISMO... he's with Zoom but they're run by the same media company as HPI I believe... either way he will know who you should speak to

Let us know if your heading out for a drive and want some company:) not sure my POS can keep up tho;)

The neat thing about the vents is that there are rain channels built in to drain moisture and rain water. The Vent outlet are angled in such a way that water does not really escape into the engine bay even when I am at the car wash

Any chance of a close up pic please to explain this?

Thanks :D

Detailed photos of trick vent rain channels at your request sir....

Shot taken at almost vertical angle to the vent, you cannot see the opening, therefore rain water cannot enter the engine bay directly when car is stationary. This does not matter if car is travelling at speed obviously:

dscf0082v.jpg

Shot taken at slight angle, now you see the vent opening

dscf0083b.jpg

You can see the scoop under the vent opening to catch and drain water:

dscf0081v.jpg

More detailed shots of the scoop under the vent opening:

You can see that the scoop is in fact created by a second layer of carbon fibre underneath the vent. The scoop has channels which directs water inbetween the top and base layer of carbon all the way to drain holes at the leading edge of the bonnet.

dscf0080f.jpg

dscf0079g.jpg

dscf0078e.jpg

Man, the Nismo guys are clever, and think of absolutely everything! I hope this helps N1GTR.

Cheers

Matt

I hope you're sitting down when you find out how much these bonnets cost!

Matt - Looks like the TE37s need a little clean. :banana:

Heres a cheapy bonnet on japan yahoo auction..

http://page10.auctions.yahoo.co.jp/jp/auction/m69503151

Matt, that dyno chart is amazing mate - the curve is identical to my 32, but with an extra 100kw atw! Simply incredible, I can only imagine the surge when you put your foot down. No wonder you're taking your time getting used to it before taking it for a proper hard drive - that kind of power is not to be taken lightly :happy:

One question for you - how are you finding the Yokohama AD08? With 100kw less than you, I find my car searching for traction often enough - do the AD08 get the power down to the ground well?

Congrats on such a gorgeous car and amazing result, 100% pur car pr0n. Ben really is a master of his trade.

Cheers

Aaron

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
×
×
  • Create New...