Jump to content
SAU Community

Hks Gt-rs Turbo Compatability For M35

mym35

By mym35,
in Four Door Family & Wagoneers

 Share

Recommended Posts

scotty nm35 Grand Master

scotty nm35

Posted
Posted
just a quick question.Does anyone know if the hks gt-rs turbo with t3 flange a straight fit on the m35 stagea? :huh:

Not straight on, You may possibly be able to fit it in there, you would then have to make a custom manifold as the standard turbo is a completely different shape.

Then you could run silicone pipe on the the compressor side. A bit of stuffing around but I hope to do it myself once I build up a 3.5L block.

iamhe77 Grand Master

iamhe77

Posted
Posted
Not straight on, You may possibly be able to fit it in there, you would then have to make a custom manifold as the standard turbo is a completely different shape.

Then you could run silicone pipe on the the compressor side. A bit of stuffing around but I hope to do it myself once I build up a couple of 3.5L blocks.

fixed :huh:

Daleo Grand Master

Daleo

Posted
Posted
which means? :down:

I believe it means scotty nm35 has his first taker for the VQ35det group buy... :thumbsup:

Back on topic, it seems to mean that, no, the HKS GT-RS doesnot appear to be a direct fit.

iamhe77 Grand Master

iamhe77

Posted
Posted
I believe it means scotty nm35 has his first taker for the VQ35det group buy... :thumbsup:

Back on topic, it seems to mean that, no, the HKS GT-RS doesnot appear to be a direct fit.

The GT-RS fits nicely size-wise, but as Scotty said, a custom manifold is required.. not to mention the oil/water lines.

It will be a bit shorter than the M24N as well, so the stock dump will be no good - although I would safely assume that if you are putting a GT-RS in, you would also have a full exhaust :down:

Daleo Grand Master

Daleo

Posted
Posted
Ah I wondered if the engine was the same enough to fit. I think the same thing is possible with the supercharger kit for the V35 skylines with the VQ35DE isn't it?

I like your thinking, a supercharged 4wd 3.5l stag would be quite a weapon. Might be easier/ cheaper to buy a PNM35 and s/c it? :D

DaveB Mentor

DaveB

Posted
Posted
I like your thinking, a supercharged 4wd 3.5l stag would be quite a weapon. Might be easier/ cheaper to buy a PNM35 and s/c it? :D

Oh yeah, that might actually convince me to "upgrade" to an M35 :)

...that is, if I was convinced that the M35's auto gearbox could handle that sort of power :banana: I wonder how strong the ATTESA system is in the M35 as well?

bbenny Mentor

bbenny

Posted
Posted (edited)

Check this link: HERE

en2.jpg

It was posted a little while ago, but its a guy in japan that has fitted a GTRS to his VQ25DET

Full custom manifold and exhaust. - If I ever have to do turbo, I will go GTRS, it seems like a great match to the VQ25 even if its gonna take some playing about to get it in there!

Ben.

Edited by bbenny
wolverine Grand Master

wolverine

Posted
Posted

HKS GT-RS is a garrett GT2871 (52 trim comp) in a HKS specific T3 turbine housing.

There is no reason local turbo shops couldn't machine the factory turbine housing to fit the turbine which would only leave the intake and oil/water lines to get sorted.

scotty nm35 Grand Master

scotty nm35

Posted
Posted
HKS GT-RS is a garrett GT2871 (52 trim comp) in a HKS specific T3 turbine housing.

There is no reason local turbo shops couldn't machine the factory turbine housing to fit the turbine which would only leave the intake and oil/water lines to get sorted.

What?? Ruin a perfectly good GT-RS by hacking the standard turbine housing onto the back? :laugh: May as well just highflow.

Go the custom manifold! The standard one is crap.

That engine is one of the elusive VQ35DET's with AWD, I love mechanical porn. :)

wolverine Grand Master

wolverine

Posted
Posted

umm...no. I didn't say hack up a HKS GT-RS.

I said it is a GT2871 (52 trim comp). So if someone wanted a close approximation then making a hybrid turbo out of a factory housing machined out to fit a GT2871 cartridge with the garrett compressor housing. It would make it easier to bolt up than the HKS unit as it would only require intake mods to make it fit.

iamhe77 Grand Master

iamhe77

Posted
Posted (edited)
My friends will make you a nice manifold for anyone wanting to do this!

if i had the coin i would get them to twin turbo it. i still want a manual behind it tho.

hmm... someone keeps telling me that an R34 Getrag 6 speed will fit... maybe you should try that ;)

Edited by iamhe77
Angus Smart Grand Master

Angus Smart

Posted
Posted
i must have been living on a different planet, but did Getrag really make the R34 gearbox?

yerp they made the box for the r34, same as the box for the "indestructible" toyota supra minus the transfer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...