Jump to content
SAU Community

Recommended Posts

some of you guys wanted so pics of the inside of the car so here they are

25772_409117682447_560567447_5007652_6915676_n.jpg

so with what i sell for work and what my dad does we decided to put a industrial pc and touch screen in to the car.

this will run everything other then the engine cos that's controlled by the haltech pro 2000.

25772_409117687447_560567447_5007653_5738467_n.jpg

25772_409117692447_560567447_5007654_4867579_n.jpg

25772_409117697447_560567447_5007655_6007225_n.jpg

  • Replies 181
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

Well once my wedding finishs tomorro and get back from some time a away the car will become more of a focas ans should be running and hitting the track for testing and sorting out I would say in the next 2 comeing months

Well once my wedding finishs tomorro and get back from some time a away the car will become more of a focas ans should be running and hitting the track for testing and sorting out I would say in the next 2 comeing months

lol that's not how it works.

in 12 months you will be selling it and buying a "sensible, family" car

hope it all goes well :cool:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...