Jump to content
SAU Community

Recommended Posts

New Intercooler sourced yesterday. 700x300x100 is the dimensions.

Both injectors and intercooler are due to arrive at the workshop today. Hopefully it wont be too long till its back together and running decent numbers again

strange, im running bosch 1000cc and 1 aeromotive intank stealth pump on e85 and up around 490rwhp mark fine.. 2200cc will do the job though :)

Sounds right mate. My Walbro in tank was maxing out as it wasn't flowing to it's full potential. Tuner said with the pump working properly he could get about 530rwhp out of it. Injector wise with 1000cc's he can get 600rwhp then they see on the limit. I've decided to chase numbers north of 600 so an upgrade is required.

Sorry I may not have worded it correctly earlier

Spoke with EFI Performance yesterday and was advised that they are installing the fuel system at the moment and fitting the new injectors that day. After that they just need to fit up the new cooler and its ready for a tune. Unfortunately as the workshop is a good 90mins + from my house i havent had a chance to pop down and get any photos

EFI are aware that i will be attending powerplay on the 10th and heavily invested in it, Ive been guaranteed it will be ready before then.

So its just a waiting game at this stage

  • Like 1

Are they going to stick a great big EFI sticker down one side of your car? Richo can stick an all star sticker and off we go!

The car currently has no workshop stickers on it. Just SAU stickers and the Jandal lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...