Jump to content
SAU Community

Recommended Posts

yup pritty sure it was u, unless some1 stole ur car and had a face mask on that looked like u :P  it was a tuesday around 6:30pm

lol!!!

I'll keep an eye out for ya next week!!!

spotted a million lines this weekend..most importantly the burgundy 33 on the pacific highway at hornsby at 2.45am :wavey: and the blue 32 with white wheels turning on to the pacific highway at berowra 3am :wavey:.. bloody nice car!

at around 230pm today (sunday) i spotted what looked like a pearl white Autech 260rs Stagea with r34gtr rims (or could have been a stock normal stagea :P ) and an black r34gtt both coming back towards sydney through the national park.

then on moore park road i saw a purple r33 gts-t with gtr bits, big rims, loud exhaust, bodyform sticker and nasty clutch by the look of it at about 530pm coming towards the city.

I spotted dinzlr and a bunch of other 'lines cruising down king georges/ryde/mona vale rd.

I feel I need to paint myself yellow, and dance naked in the street singing 'can you spot me' to the tune of 'can you feel it' before anybody will give me a sideways glance... :D

spotted a silver s15 this morning on epping rd :D car looked stock with nice rims... also had a mean sounding exhaust... plates - GRINER... hehehe.. i got a grin so the plates were well suited :D

also spotted what i thought was a skyline on epping rd near the m2... saw it from a distance and thought... that looks like a rexy.... nah.. must be a 4 door sky.... caught up... guess what!!! it was a REXY!!!!!! with round skyline light!!

OMGWTFBBQ

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...