Jump to content
SAU Community

Recommended Posts

spotted at like 7:30 ish a white r34 gtt coupe number plate BAR-*** just outside epping heading towards macquarie, was two cars behind on the left lane and stopped at lights so probably didn't see me.

Spotted a light blue r33 gtst in north ryde lastnight around 10pm

Also a white r34 4 door and a silver r34 4 door in pymble

White r33 gtst white southbound on the F3 thismorning at 7:30am

Black r32 gtst northbound on F3 at kariong around 7:45

spotted a silver 34 -FR34KE- heading on to the M2 this morning a bit after 10...

I was ninja :laugh:

yeah spotted i was heading into the entrance from bondi it took 1hr and 15 thanks to tom tom and v-power what were u in? :cool:

also saw a red R34 gt with green P's on newline road at about 2.30pm

wow im such a geek,,,, i seem to be the only one on here at the moment

^ and it did look like B.S too :D

Boy, I'm going to have to wash the car before I go out again. It's so dirty and I didn't expect to be spotted just catching lunch at maccas!

i am teh ninja-shotter :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...