Jump to content
SAU Community

Recommended Posts

Spotted yesterday...

Blue 32 GTST BHI05C with a GTR badge havin some fun at the 4 way stop sign on dickson st artarmon.

Silver 4 door 32 with black boot DOR132 and white 33 GTST RB25MD both on hotham pde artarmon.

Black 34 GTT with qld plates on gladesville bridge on my way home.

And spotted today...

White 33 GTST DTN08R wetherill park maccas.

Red R31 GTS on queens rd five dock.

Black V35 TOY4 2 on blackwall point rd wareemba.

spotted u 2 man

got the flash but wasnt sure if it was sops ahead or a felow skyline wave

lols

soz mate

didnt get the wave...windows wer dark

btw...in his gunmetal r33

and spotted white r34 at lidcombe near the shops

spotted a silver r33 with a black bonnet driving southbound on Pennant hills road at about 4.50 this arvo, had sau on side quater....

also 5 mins later spotted black r32 waiting to get on penno road from the m2, not sure if it was SLIM but looked similar and only around the corner from his place....

like spotted a bajillion skylines on putty road cruise :D
zomg spotted many a skyline also yesterday!
Spotted Chubbseh yesterday in his car yelling "everyone follow teh Failboat!"

:rofl:

No wai! Me too!

Typically, I was the only Stagea driver to show... *shakes fist*

Duncan's was off the road, which is fair enough, but other Stagea owners = Fail!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...