Jump to content
SAU Community

Recommended Posts

anddddddddd i reply a month l8r. i dont check this thread often as i never get spotted :D lol.

sheng i prob didnt notice you beep cause im usually in my own lil world. lol or could have been that u werent in a line :D

surprised i havent seen u around BLEVIT. only live in the next suburb.

Or more like ur grl told u bout the posts baaaaaaaahahaha, busted. I never get spotted least u have a couple of times! :D

you talking about Mass? cos his plates are XX 34 XX (or so i thought)

Then who's is this?

pict0395.jpg

Also, spotted an R35 last night! Just near the turn on to the F3 at waitara around 7:15 or so... Plates BJV***

Spotted a black R34 GTT and a black R33 GTSt at 8am today cruising together down Olympic drive/joseph st/roockwood drv passing through lidcome with me following in my black R32 GTR....go mighty ducks.

Spotted a black R34 GTT and a black R33 GTSt at 8am today cruising together down Olympic drive/joseph st/roockwood drv passing through lidcome with me following in my black R32 GTR....go mighty ducks.

Go the Caps :verymad:

spotted a black R33 leaving granville (turning onto parramatta road) at 11pm

funny thing is he was leaving this dead end street which has all factory type businesses except for 2 or 3 brothels loll

he's on here somehwere loll

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...