Jump to content
SAU Community

Recommended Posts

not as bad as the V35 SEDAN that had knock off GTR badges on both front quarters when I was filling up at the servo the other day, I was two rows over & you could still tell they were a cheapo ebay item too small & too red on the "R" it was like a neon red lulz

ahh was that v35 white? If so it was about 500kw and was built before nissan got around to doing the r35.....

i think I know which one you are talking about, it was at one of the sydney autosalons from memory didn't know the white one was a sedan though :D

no, this thing was a bog stock V35 silver sedan :P with knock off GTR badges on the two front quarters :P probably would've seen a dirty big one on the back had I not turned my head away in disgust

Spotted RJ (R 2 The J) and his 33 at thornleigh maccas, thanks for the bov should be on soon :D

and also a nice black 34 gtst very clean driving up pennant hills rd then at maccas you went into the drive through. JAY-XXX????

I was in the black stagea :)

white R33 s2 with standard yellow plates running up my arse on the M4 yesterday

then proceeded to cut through lanes of traffic to get ahead only for me to catch up anyway by the time you hit the servo/maccas after the blacktown exit

well done @ssbag, don't you know its DD's?

not as bad as the V35 SEDAN that had knock off GTR badges on both front quarters when I was filling up at the servo the other day, I was two rows over & you could still tell they were a cheapo ebay item too small & too red on the "R" it was like a neon red lulz

Man I spotted this car today too and yes it did have one on the back too lmao!

Saw these in Thailand, I think the Tuk Tuk was epic, it was all pimped out with R33 tail lights, exhaust, Massive sound system and assortment of led's and black lights....

did anyone notice the 2JZGTE engine and turbo on the boat???? DAmmit ive just zoomed into the pic now at home and i realise the potential that shack boat might have had, from a distance i didnt notice what engine it was :blush:

But still wtf? on a boat? I only saw one supra in Bangkok city...

post-53255-1262694982_thumb.jpg

post-53255-1262695066_thumb.jpg

post-53255-1262695104_thumb.jpg

post-53255-1262695168_thumb.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...