Jump to content
SAU Community

Recommended Posts

Spotted a nice clean Black R33 GTST with 400R Bar and sideskirts going down Lane Cove Road after work yesterday. Looked like gold center rims with silver rim - GTC's?

I would have waved but was in the stealthy Mazda 3.

^ did it have stock wheels? that would of been my mate he was there around that time, mint car !

spotted an r32 gtr RUGAME, drove next to him briefly at sylvania around 6:30 tonight

yeh it hand standard wheels standard height

Spotted a nice clean Black R33 GTST with 400R Bar and sideskirts going down Lane Cove Road after work yesterday. Looked like gold center rims with silver rim - GTC's?

I would have waved but was in the stealthy Mazda 3.

I went past a 3 yesterday @ top ride shopping center. loud as f**k, turned right at the lights near the civic center. Looked good.... for a 3....

This yours?

Naw, our three is bone stock. Only mod I'm allowed to make to it is to change the steel stocker wheels for mags when the tyres wear out.

There is also some R33 GTR in black that works in the Hyundai bldg in N. Ryde. I've given him a wave - even in my GTR but pays no attention or maybe He thinks I'm gay trying to pick up on him or som'n. lol

Spotted BK1990 looking for a parking spot at La Perouse on Monday! Around 2-3pm. Nice neat looking 34R mate!

haha thanks mate fluked one down the bottom after 3 times going around and around haha .Saw a white 33 gtr on the m4 about 2pm today heading blacktown way .

spotted a r34 gtt turning on to the m4 around midday yesterday ,another 34 gtt think it was midnight purple from far on cumberland highway around 2pm yesterday and a r34 gtfour at subway bass hill around 12 this morning

Spotted a r32 GTR in Narellan , turning into the mall at lights. Purple like paint , exaust , standard looking with GTR 32x something plate .

Parked next to us at the lights , first heard the unmistakable sound of the rb26.

Good to see , hot car mate

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...