Jump to content
SAU Community

Recommended Posts

Spotted a clean silver r33 gtst series 2 with some pretty big chromes trying to race this arvo at carlingford. Plates were "TO00NZ" or something similar

Wasn't a R33 by any chance? I don't floor it everywhere, but I take my corners pretty quick (I just love to :P), green p's and N/A, looks like a gtst though, also live in Raby. What side do you live on? Near the school or the shops?

First spot, White R33 S2 :D

Hi i am near Raby shops, no its not a 33 its a 34 i know my skylines. It is so frustrating who ever it is. Havent seen a white 33 around in ages. Where in Raby are you ?

Complimented a guy at Robertson Petrol Station on Sunday on his clean 33 GTR, plates "97 GTR", I was the guy in chefs gear.

Also spotted on Sunday a Maroon 33 GTST with duck spoiler and possibly a roof spoiler. Came past work in the morning and saw it heading back towards the coast in the arvo.

red 34 pulled up next to me on epping rd outside the ranch, got a nod and we boosted off =)

and looking for a parking spot in chatswood westfield i spotted CT????? 33 GTR so parked next to it, have a pic which I'll put up soon hahaha. came back and the 2 security guards were literally standing there admiring.

Took the GTR out for drive down McCarr's Creek Road though Church point. Saw a couple of other skylines and gave a wave. They were doing the same but in the opposite direction cause I saw them twice :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...