Jump to content
SAU Community

Recommended Posts

  • 3 months later...

Hey, I got my gaskets today but was under the impression they would come with the 'half moons' aswell. Was I supposed to separately order them? You didn't provide a part number so I just assumed it came with the new ones. I have some decent gasket sealer, would you recommend using this on the existing half moon things?

Thanks.

Edited by -Jimmy-
  • 2 weeks later...
Hey, I got my gaskets today but was under the impression they would come with the 'half moons' aswell. Was I supposed to separately order them? You didn't provide a part number so I just assumed it came with the new ones. I have some decent gasket sealer, would you recommend using this on the existing half moon things?

Thanks.

searching on an old thread about this, part # for those cam seals is 11051-58S00

see: http://www.skylinesaustralia.com/forums/Ch...l&hl=rocker (images are all broken)

run a thin line of silicone gasket maker (blue/grey or black stuff, same as you would use for the sump) under the half moons before you install them.

the rest of the cam cover gaskets do not require sealant.

they do require rubber bushes on each screw/bolt in good condition (replace them! or just use 3mm slices of fuel hose like we did in the race car).

most important...do not over-tighten the cam cover bolts...they are meant to be 15-20nm only!!!

  • Like 1
  • 1 month later...

Hey guys,

I also want to replace the rocket cover seals,

as well and paint the covers at the same time :laugh:

Was ready further bak in the thread that the seals are the same for rb20, rb25, an rb26 if this is true dose this mean i can put rb26 rocket covers and rb26 cam covers on at the same time if i can get a hold of sum..??

Cheerz..

  • 8 months later...

Our drift pig is leaking like a b!tch out of the rocker covers and would love to replace them.

Just one question - What the fcuk is this half moon seal you are talking about?!!? Can you point it out to me! Would be greatly appreciated!

I just checked again and he said "Sorry no pics included" of the half moons. Is it actually on the back of the head (accessible easily/easy to change?). If so, once i order the parts i'm sure i can figure out which they are lol.

run a thin line of silicone gasket maker (blue/grey or black stuff, same as you would use for the sump) under the half moons before you install them.

the rest of the cam cover gaskets do not require sealant.

they do require rubber bushes on each screw/bolt in good condition (replace them! or just use 3mm slices of fuel hose like we did in the race car).

most important...do not over-tighten the cam cover bolts...they are meant to be 15-20nm only!!!

Well i never seen this thread when i did mine and not wanting to splurge on new gaskets when I did it I used a thin line of sealant (grey stuff from memory) all way around, prolly no need hey, im not even sure they old ones were no good i just did it thinking better safe than sorry :ermm: and now you also have me worried I have overtightened them as well, why is it so important not to overtighten.

Im a pretty bodgey backyard mech at times,

( Although I just invested 25$ in a torque wrench thats about as technological as my toolbox gets), but i dont usually over tighten things just tighten till it stops turning freely then give it a nip. WHile im at it should ex manifold and turbo bolts be torqued or just tighten ?

Cause I just gave them an extra hard nip ... :D

Edited by Arthur T3

well....generally....every bolt with a given strength has a proper torque that it should be tightened to. overtightening is very dangerous because it will stretch the bolt/stud further that it is designed for, causing it to weaken or break. This is very important....overtorqued bolts/studs break all the time, in particular wheel studs. The engineers who decide the right torque have done a heap of testing before deciding on the safe maxiumium torque.

Through the magic of mspaint....

bolt_torque.jpg

A is elastic phase. while you are here the bolt will basically be fine, forever, over and over. it bounces back.

B is the yeild point. past here you damage that bolt forever

C is the plastic phase....it is changing shape (stretching) forever but has not broken

D you have stuffed it....it just snapped.

The target torque for a faster is normally about 75% of it's yield point (keeps 25% safety margin). An M6 bolt like the cam cover bolts is only 20nm. ie quite light when done by hand.

But.....these are rubber seals and not metal on metal like most bolts. Here they are trying to make sure you don't squash the rubber too far and deform it. so the correct torque is even lighter still. You will see the rubber washers bulge a little, but not be squashed, at the right torque

  • 4 months later...
  • 1 month later...
  • 1 month later...

Just wana say thank you for this thread, my liner was diagnosed with a leak from rocker cover when its 100,000k service was done in march 08!!! I saw this yesterday and went and bought the kit from bursons and spent the arvo doing and and painting parts at the same time (also replaced intake pipe while it was accessible)

Looking forward to a clean garage floor!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...