Jump to content
SAU Community

Recommended Posts

Rb25det (standard internals)

- Standard Injetors

- Standard AFM

- Stock Air box (K&N filter)

- GCG High flow OP6 housing

- Power FC

- Trust cooler

- Nismo Fuel reg

- Exhaust

- Bosch Pump

274.2 rwkw

Running 16 psi

Tuned by 'Femno' on a 2008 Dyno Dynamics

Running very safe AFR's

Opinions welcomed

post-18581-1256464786_thumb.jpg

Edited by DFAULT
  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

there is something wrong there, you are getting 274 rwkw from the standard injectors and afm???

I have 210rwkw with the injectors frequently hitting 100% duty according to the pfc hand controller and the afm is tuned to 110% and still maxing out.

Well I know for a fact the standard injectors are capable of that power figure because Oblivion makes those figures on them.

But the AFM? I know for a fact the airflow required to make that hp is well and truly out of the scope of the standard AFM.

I'm sceptical but would be good to see some other 'more informative' graphs

DFAULT,

Which RB25DET is it?

What are the AFR's?

Great power result, I'm kinda tempted into keeping my 33 instead of getting a GT-R.

Cheers

Grant

p.s. is there a exhaust cam gears?

Edited by Count Grantleyish

What the........... That is amazing. Can somebody tell me why im only doing 233kws? on 17.5 psi

- full exhaust

- fmic

- pody

- z32

- 5 puk heavy duty clutch

- walbro

- 740cc injectors

- pfc

- ebc

- hyper gear highflow on stock turbo highflow

thats insane power mate!

What the........... That is amazing. Can somebody tell me why im only doing 233kws? on 17.5 psi

- full exhaust

- fmic

- pody

- z32

- 5 puk heavy duty clutch

- walbro

- 740cc injectors

- pfc

- ebc

- hyper gear highflow on stock turbo highflow

thats insane power mate!

What exhaust housing are you using, if its still the standard housing then that would be limiting you, you will get more with the op6 rear.

What the........... That is amazing. Can somebody tell me why im only doing 233kws? on 17.5 psi

- full exhaust

- fmic

- pody

- z32

- 5 puk heavy duty clutch

- walbro

- 740cc injectors

- pfc

- ebc

- hyper gear highflow on stock turbo highflow

thats insane power mate!

Geraus you have a different highflow so no comparison.

well i was the one that sold the turbo to danno and my car made 269.9rwkw and some ppl had doubt when i posted it up.

here are some more dyno graphs.

geraus - i have a back to back with your cars dyno result.

basetsr34dyno.jpg

basetr34dyno2.jpg

i 'scored' 230rwkw on a stock turbo, 12psi, stock injectors with stock reg, stock fuel pump, stock afm.

my point? high reading dynos are everywhere.

the important thing is a good tune, with good power delivery, etc etc.

1. You can tune past the AFM. Always have been able too.

2. Fuel reg is aftermarket, so the power can be made on stock injectors.

It's just too high compared to the rest of the world for 16psi IMO.

Not saying it's safe to do either of the above either ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...