Jump to content
SAU Community

Recommended Posts

hey gents

well finally got around to putting some incar from the Townsville Mt Stuart hillclimb together.

My Wife Sarah Navigated and did an awsome job for her first time , with the help of some Ben Wooster tuition, thanks Ben!

Mind you she did get sick at the top most of the first day, then came good.

Its a really enjoyable event, highly recommend the drive.

(mods please move if in the wrong section)

cheers Russ

Link to comment
https://www.sau.com.au/forums/topic/297199-mt-stuart-hill-climb-fun/
Share on other sites

Good stuff, impressive time. I saw you drive past me on university road the morning of the hill climb on my way to work. I so wanted to come see you race but couldn't get the day off. Never seen a R35 in real life and saw you coming and was like "WTF is that?" haha.

You going to be back next year?

Edited by PM-R33

Good driving there Russ, looks a little narrow for a big r35 boat :)

how many runs up the hill and how long was it?

Sarah did very well, nice and clear, and most importantly ready to admit when she was off notes temporarily. Not sure that she will be rushing back into that seat if she gets sick though....

yeah the r35 is a big car for that road, but awsome fun.

the tyres were completely rooted by the end, all four had delaminated on the inner part of the tread about three inches wide down through the steel belt, not pretty!

I would love to go back there but may not make it next year , Being i am in Darwin for awhile now.

Probably wont go back in the r35, i have an old friend rejoining the stable :)

yeah the r35 is a big car for that road, but awsome fun.

the tyres were completely rooted by the end, all four had delaminated on the inner part of the tread about three inches wide down through the steel belt, not pretty!

I would love to go back there but may not make it next year , Being i am in Darwin for awhile now.

Probably wont go back in the r35, i have an old friend rejoining the stable :D

Old friend ya say....Hmmmm. (strokes beard)...Is it black? :P

YOU BET IT IS ! :thumbsup:

That is awesome news. It deserves to be back with it's traditional owners.

Not sure if you saw these yet but here's a few from my weekend that unfortunatly ended a bit earlier than expected. Although it made for an enjoyable afternoon knocking the tops off a few "cokes" with Mark, Benny and the Boys.

I hope you can make it back next year though. Was good havin ya here. You to Ben. Need to get ya 32 up here.

Can't wait to race up there again.

how many runs up the hill and how long was it?

We did 10 runs all up. Reccy on saturday morning then 3 runs in the arvo. Then 7 runs on sunday. The course is about 7.5km long then transport back down the the service park.

Next year they are trying to sercure the use of the parkland section of the v8 supercar track to run a prolog on on the friday evening aswell which will be a bit exciting for us and better for the spectators.

Marlin Posted Today, 09:09 AM

I'd really like to bring it next year, and I think I will Was a very fun weekend, great fellas

That'd be excellent Ben. I have plenty of room at my new place for as many cars as ya wanna bring.

NZM.031 Posted Today, 09:54 AM

is there much damage to the car??

All fixed now except still needs a new front bar but i'm making do with the zip tie look at the moment. It needed an new custom radiator from PWR, new intercooler, windscreen headlight, radiator support assembelly and a new dry sump pump drive shaft and belt.

DSC00665.jpg

DSC00664.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had another look at the car and I noticed the fuel pump isn't priming on ignition. I'd taken out the pump from the boot to siphon out the old fuel, so maybe I've knocked something loose or broken a wire putting things back together. Will go back with a multimeter and try to work out what's stuffed. Kinda hoping it's the pump itself thats gone so I can upgrade it
    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
×
×
  • Create New...