Jump to content
SAU Community

Off To Japan For A Couple Of Weeks.....any Tips?


Recommended Posts

Hey ppl,

I'm off to Japan in a couple of weeks and I was just wanting to know who's been there before and whats worth checking out given the time frames I have to work with.

I'll be in Osaka for 4 days, Hakuba for 5 and Tokyo for 7.

Let me know where you've been (good or bad). Any advice would be much appreciated.

Cheers,

Steve

When are you going?

There is the Tokyo Auto Salon in Jan. Around the 10th i think from memory.

15th - 17th of Jan which is when I'll be over there.

My two weeks in Japan on JDMST, post 60 onwards: http://forum.jdmstyletuning.com/showthread...1573&page=3

You'll need to sign up to read it.

Make sure you have a JR pass for the two weeks, I used mine a freaking lot!

Don't stress about train systems, the private ones just get the cheapest ticket and pay the difference at the other end if you need to.

Also, if you are changing lines at a private station (metro etc) then make sure you dont put your ticket in an orange labeled machine (it will take it thinking you are leaving the station)

Pre book your shinkansen seats a day or two in advance so you can get a train at a decent time, however if you get on at a station at the start of the trip you can usually get a seat in a non reserved carriage.

Not all toilets in regional areas have western toilet bowls (makes an interesting event in the dunny)

Make sure you know what you want to do the day before hand, and dont be suprised if you cannot find the thing you are looking for.

People in Tokyo may say they dont speak english but a lot understand a little.

Try to work out the kanji for beed, pork, chicken, tempura, prawn etc. It helps a lot in restaurants!!!!!

Hope your single, the girls in Tokyo are f**king HAWTTTTT!

If you want to do car stuff try to get onto someone who is hooked up before you go, unless you speak the language and get a chance to stop and talk to someone who looks in the know you may be shit out of luck.

Dont be concearned with the feeling of xenophibia on the trains, Japanese dont really like having a whitie in their personal space. In restaurants they are fine serving you etc, but other than that I noticed a fair bit of racism. End of the day its their country, irony is the obsession with western culture :P

Tokyo for me was very different to the rest of the country, but Im not sure about Osaka.

Any other questions PM me.

OH and dont expect to see alot of jap performance cars around.

You will see millions of taxis, little cars like micra, and european cars.

Most of the jap performance i was was out of the cities.

And...If you like Anime check out the Ghibli museum, freaking amazing!

hm ok well as it appears your all going over there, who wants yo find me a low mount t67 kit for my rb25???? :P

From trust? No such thing, T67 comes in kits SR20 only. Can buy it separate and make a manifold, doubt it will fit, the comp cover is as big if not bigger than to T04S comp cover that comes with the GT30/35 series turbos from garrett. I managed to get a GT30 to just fit on mine, but I decided it was too close and went high mount.

Off topic sorry :D

I have only ever found 1 low mount manifold which was on ebay from jps trading on ebay....sadly before i bought it the person I told about it bought it instead....then on sold it...and it wasnt to me no doubt for much more than the cheap price it was purchased for. The t67 I'm pretty sure did fit on it.

Thems the breaks though.

Still on the hunt for the same manifold...which I doubt ill ever find :P

more off topic...sorry

a mate and i will be over there from the 6th of jan to the 27th of jan!

Tokyo Autosalon FTW!

who else will be over there... Wheezy, i think i;d like to hear more of your tips as this is my first time overseas and i feel it might be a bit of a shock when i get there.

I was there in oct last year... had a absolute ball...

Tokyo - It's pretty overwhelming at first, just try and fully immerse yourself in the culture of it.. I regret not doing that, the girl I went with was too scared do so and buggered up that part of the trip.

If you get the chance go to Kyoto there are soooo many beautiful temples there and maybe try and take a day trip to Nara, where the biggest wooden temple in the world is and HEAP of cute little deers who will turn nasty and ear your clothes once you run out of biscuits to give them.

Golden Pavillion is a must see. And you might spot a few geishas down the back streets of Kyoto if your lucky. There were plenty of other "ladies of the night" there done up to the max to entertain the business men.

I hardly saw any modified cars around, I got excited every time I did see a skyline.

If you go to Harajuku make sure you go on the weekends. Thats when all the Harajuku girls are out.

I didn't find the Japanese racist at all. Some got a little irritated trying to explain things to me because I couldn't understand but in general I found them most accommodating and patient. it pays to know a few Japanese words, especially "thank you" and "excuse me". I think I used those the most.

Otherwise just go with no expectations and it will totally blow your mind! and the girls over there are STUNNING and so fashionable.

Have a awesome time!

If you want to pick up some handy relevant Japanese easily try this -

http://www.earwormslearning.com/intro.html

http://www.earwormslearning.com/pdf/Booklet_Japanese.pdf

I've been using it and I find it works really well, I've remembered heaps of stuff and I'm pretty stupid :nyaanyaa:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...