Jump to content
SAU Community

Recommended Posts

Hey,

Going for a long trip for 3 weeks and the car will be sitting unused. Should there be anything I should worry about? Ill probably just disconnect the battery but can the car comfortably sit for 3 weeks without being started?

If i leave my car for 2 days the tappets make loud noise on start up until pressure builds up etc, so not sure what to expect after 3 weeks..

Cheers

Link to comment
https://www.sau.com.au/forums/topic/300012-leaving-car-for-3-weeks/
Share on other sites

Yeah mate. Should not be a problem. Mine sits for up to a month with starting and I don't have any problems. I also have a cteck charger connected to it so the battery is also good. The tappet noise you have, in my opinion is a problem with oil the type of oil you are use or they are on there way out.

For 3 weeks you should be fine. Just disconnect the battery and park it in a safe place. I've gone on holidays for 2 to 3 weeks at a time with other cars and they started and ran fine. One of my friends just recently started his worked 1990 turbo supra after 9 months of sitting in his garage. Put a new battery in and ran and drove beautifully and changed the fluids later that day. As for the tappets sorry I have no advise to help you with that.

Ye it should be fine just don't forget to d/c the battery as you said. I forgot to do this once when I went on like a two week holiday during winter time and then I came back and gone....battery dead haha (but I think it was a older battery aswell tho)

if your battery goes flat after not being driven for 3 weeks then the battery is shot to start with. my mum had an operation on her hand and didn't driver her car for 6 weeks and she just parked the car on the driveway and didn't do a thing and it was fine when she went to drive it the other day.

disconnecting the battery will reduce the chance of it being stolen, but if you have an alarm in the car it may stop the siren from going off.

If your battery is a bit suss, or the alarm/immobiliser system tends to drain the battery, then d/c it; keeping in mind that you'll need the code to your ICE to get it going again when you come home.

Before restarting, it's always a good policy to put just a bit of oil in, before turning the engine over. It can depend also, on the quality of oil you already have in the car.

Valve lifters are a 'different' issue however.

it's only 3 weeks. if it was 6 months then maybe, but not 3 weeks. but then if it was 6 months you wouldn't want to have a full tank of fuel as higher octane fuels go stale (loses its octane rating) quicker than lower octane fuels so you wouldn't want to drive it much (or very hard) if the car had been sitting for a long time and the fuel had gone stale.

I always disconnect the negative battery terminal as my car sits for months on end..

Just do this and u will have no probs with the battery

My car sat in my friends shed for 2 and a half years without being started, we put a new battery in it and it started straight away , Trusty nissan :)

After sitting for long periods sometimes ill drive it and it will splutter a bit and wont idle,occasionly it would even stall ,so i rev the crap out of it for a bit and its fixed :P I think its just some buildup on a sensor or something, but it always fixes itself once its driven and gets hot

If you are getting tappet noise maybe cause your oil is too thick on startup, but i wouldnt stress to much just dont drive it till it stops ticking. Let it warm up . Try a thinner oil

But yeah 2.5 years mate , so 3 weeks no problems, just disconnect the negative

haha no drama's. The tappet noise is only for a second, just signs the engine getting tired.

Ill be leaving the car at the end of my fuel cycle (ie. low/empty tank) should I top it back up to full and leave it? Will the fuel after 3 weeks be useless?

cheers

haha no drama's. The tappet noise is only for a second, just signs the engine getting tired.

Ill be leaving the car at the end of my fuel cycle (ie. low/empty tank) should I top it back up to full and leave it? Will the fuel after 3 weeks be useless?

cheers

Really doesnt matter mate, it will still be fuel when you get back..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...