Jump to content
SAU Community

Recommended Posts

hope it wasn't the yellow supra i see around town - i've always thought it was kinda nice to look at in a ricey sort of way. too huge a body kit for my taste, but quite striking.

spotted a white r33 with DTS written down the side tonight at blockbuster woden. not sure if he's a local coz he started going out the 'in' lane from hindmarsh drive.

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/294/#findComment-2074294
Share on other sites

not a skyline, but last night i spotted a yellow supra mount a gutter and then get stuck on the median strip between the servo and shops at kaleen, took them about 45 mins to figure out how to get it off there, the body kit didnt look too good after

sounds like the yellow non turbo one with the veilside kit i see frequently at ANU. P plater non turbo, driven by an international student guy

yeh, a wee bit too much rice for my liking

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/294/#findComment-2074402
Share on other sites

I think everyone knows that supra... I see it all the time. From a distance it looked allright. Get up close and it looks pretty average (lots of cracks and scrapes all over the place)... Beaching it probably hasn't helped it any either :

Edited by Sauce
Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/294/#findComment-2074476
Share on other sites

hope it wasn't the yellow supra i see around town - i've always thought it was kinda nice to look at in a ricey sort of way. too huge a body kit for my taste, but quite striking.

spotted a white r33 with DTS written down the side tonight at blockbuster woden. not sure if he's a local coz he started going out the 'in' lane from hindmarsh drive.

yep hes a local, i did a CIT welding course with him. he works at DTS

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/294/#findComment-2075105
Share on other sites

that was me..

u should have said hi! you're the guy who knows scotty right? I remember tallking to you in the south coast thread a long time ago ;)

i would of said gday, but i wasnt too sure.. just seeing the sau sticker and a chick in a wine 33, was to sure...

i was in my daily (charade) just got off that big roundabout at kinston doing reverse nuts :thumbsup:

yer, scottys in wollongong these days, saw him up there about a month and half ago in my rotor... couldnt believe it!!!

such a small world

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/294/#findComment-2076522
Share on other sites

sounds like the yellow non turbo one with the veilside kit i see frequently at ANU. P plater non turbo, driven by an international student guy

yeh, a wee bit too much rice for my liking

yep thats the one, think he was gonna try swinging a nut in the carpark afterwards, kinda didnt work

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/294/#findComment-2076562
Share on other sites

Spotted Thursday morn': a de-winged R32 with a "work-in-progress" vented bonnet heading towards Queanbo' on Lanyon Drive. Looked like the car will turn out nice! Also spotted this morning one of the angriest sounding R31's I've ever seen at Macca's in Fyshwick about 8.30. Black 2 door;anyone on here(jeez,I hope so)?!?

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/294/#findComment-2077442
Share on other sites

There's a guy with a black 2 door 31 that works at Domayne in Fyshwick, perhaps that's the one you saw.

You want an angry 31 Jayce, keep a keen lookout for a gunmetal Aussie 4 door that has a habit of getting sideways under boost (Frink, Bullet31 and Stinkypoo know which car I'm talking about)

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/294/#findComment-2077734
Share on other sites

There's a guy with a black 2 door 31 that works at Domayne in Fyshwick, perhaps that's the one you saw.

You want an angry 31 Jayce, keep a keen lookout for a gunmetal Aussie 4 door that has a habit of getting sideways under boost (Frink, Bullet31 and Stinkypoo know which car I'm talking about)

Now I'm interested!

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/294/#findComment-2077835
Share on other sites

You want an angry 31 Jayce, keep a keen lookout for a gunmetal Aussie 4 door that has a habit of getting sideways under boost (Frink, Bullet31 and Stinkypoo know which car I'm talking about)

Is this the one that was out with you lot on the night of the big RJ's meet about 2-3 weeks ago??

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/294/#findComment-2077878
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...