Jump to content
SAU Community

Recommended Posts

Spotted a black 33 with a big dent behind the drivers door going down... uh... that road with the turnoff to coppins crossing sometime this afternoon, and a white 32 with no wing on uriarra road, but didn't wave because i didn't even notice the car until it was going past me ^^;

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/347/#findComment-2607947
Share on other sites

I spotted loads of skylines this arvos and tonight,

ok lets see if i can remember... a chick driving a silver 32 through oconnor around 5:30, white S1 R33 parked at lyneham hockey centre, greenish GTS 4 R33? driving through civic around 7pm, black r32 parked in bradden around 7, white R33 with white wheels parked behind the noodle house dickson around 7:40, it had a red trojan sticker on its arse. I think thats it.

Good days spotting.

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/347/#findComment-2608412
Share on other sites

Saw a silver 33 GTR waiting a couple of cars back at the lights on coulter and belconnen way this morning about 7:45 (I was waiting at the lights on the other side of the intersection). Would've waved but just as I saw it another car came up and blocked my view. Had what looked like silver 5 spoke wheels. Looked great from what I saw :P

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/347/#findComment-2609434
Share on other sites

Guest 180Chick

Spotted a black (I think - it was dark) R33 GTST turning left off Kingsford Smith onto that road that is dark and windy to Charnwood area last night - sorry about my smoke, blown oil seals on the T25 and just taking it for a nurse to get the battery charged so it could make the workshop today hehe.

Edited by 180Chick
Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/347/#findComment-2609691
Share on other sites

Spotted a gun metal r32 GTR with Trojan stickers all over it in the weirdest spot today, Woden Plaza (like in next to the fresh fruits place.. not just outside :P)!! Made my day lol, promoting defensive driver courses and skid pans days :)

Edited by skyline_babe5
Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/347/#findComment-2614509
Share on other sites

Spotted a gun metal r32 GTR with Trojan stickers all over it in the weirdest spot today, Woden Plaza (like in next to the fresh fruits place.. not just outside :P)!! Made my day lol, promoting defensive driver courses and skid pans days :)

Yeah Derrek has his GTR promoting like you said. I went and had a good chat and had a sit in it yesterday. Got me out of the boring office.

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/347/#findComment-2614679
Share on other sites

i keep seeing this black R33 around tuggers with a mild kit (got no idea what kind!), a flat boot lid, exhaust and some nice wheels (again, dont know what kind... lota help i am!!!) with a nismo sticker on the back of the boot lid. car looks very nice. anyone from here??

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/347/#findComment-2616031
Share on other sites

i keep seeing this black R33 around tuggers with a mild kit (got no idea what kind!), a flat boot lid, exhaust and some nice wheels (again, dont know what kind... lota help i am!!!) with a nismo sticker on the back of the boot lid. car looks very nice. anyone from here??

think i saw the same 33 parked near lake tuggerz college.. not sure who owns it though..

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/347/#findComment-2616348
Share on other sites

think i saw the same 33 parked near lake tuggerz college.. not sure who owns it though..

:D i saw that one aswell, parked outside the tennis courts. Saw a blonde chick in a black r33 along the parkway heading down tuggers way

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/347/#findComment-2617001
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...