Jump to content
SAU Community

Recommended Posts

HAHAHAHAHA well it would have been pissed when I'd done cleaning the inside and peeled it off then wouldn't I?!

rofl thanks Shell, only emphasising the subject of my recent PM. Well at least this makes things easier.

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/570/#findComment-4738082
Share on other sites

Spotted white 33 turning left out of clift onto johnson this arvo, got a nod gave a wave ;)

also shell, just for you

29072009197.th.jpg

(note: the top-left corner of the rubber seal for the windscreen is gone, so it might look crooked.

Can I has a cookie?

also, take note of the horrible condition of the paint on my roof: not my fault :(

Edited by Trozzle
Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/570/#findComment-4738797
Share on other sites

Welcome to SAU Scott! :P

mmm R34GTR noice :):(

hopefully we'll spot you around and add you to the thread... what colour is it? Any mods?

Its Sky blue only mods is exhaust and intercooler.

Wanting to put it on the Dyno to see what the car does, Are you guys going to do a Dyno day soon lol

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/570/#findComment-4742743
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
×
×
  • Create New...