Jump to content
SAU Community

Recommended Posts

  • Replies 90
  • Created
  • Last Reply

Top Posters In This Topic

how big was the chunk? to be honest with all that compression n shit i recon it would just burn that crap out thinking its a small piece.. on a larger scale good luck with the rebuild not gona sit here saying why did u start it.. the past is the past if she needs a rebuild just enjoy it :D i know i would:D

funny thing is i drove it for the first time in 7 months after my accident and this happends

it wasnt clicked over for 7 months cos i had a front end colision

ony drove it 100 kms grr i misss it lol

well i did the whoe process and its not as loud but still there

ionly started it for 5 seconds

i dont know weather to let it keep running and let it crush up for to leave it

hmm this is giving me the shits

i just did some reasearch on the ngk website and the dumbshit at autobran has given me the wrong plug i think

the codes are different too what i got so it might be the answer

SON OF A BITCH

i just did some reasearch on the ngk website and the dumbshit at autobran has given me the wrong plug i think

the codes are different too what i got so it might be the answer

SON OF A BITCH

Check part numbers in the shop, where possible check inside the packaging too. Nearly had wrong oil filters a few times and been handed the wrong fuel filter before. Same goes for plugs, everything really.

if it screws in fine, the fault is yours. i havent used the specified plugs in my car for 4 years.

it sounds like you're dead-set on running your car without checking anything at all. although i think its fcuking stupid i'll give you some tips on how to do a bit less damage than you already have:

pull out the CAS and injector looms, pull out ALL spark plugs, pour some oil (around 300ml) into the bore through the plug hole of the cylinder you dropped the crap into then crank the motor for 5sec. do this a few times.

this may not fix your problem but at least this way you have more of a chance of success than the route you're taking now. keep in mind that you should get ALL of the oil out before starting the car again otherwise you may cause the car to hydraulic lock once the plugs are in. its not as easy as it sounds so if you dont feel comfortable doing it - dont!

when you turn your car on you will get a fair bit of blue smoke out of the exhaust from the oil that is now in there - give it some time to burn up.

again, DO THIS AT YOUR OWN RISK and i HIGHLY recommend you rip the head off or at least get a bore scope instead.

LOL @ the people saying it'll crush up/burn...

1: It's the end of a spark plug. It won't burn

2: While it's being "crushed up" it's being slammed into your bore and gouging the f**k out of it...

3: When it reaches the head side of things and gets to the valves... Even more trouble...

I have a piece of piston come loose and "crush up" in my motor... It took everything out, lost compression through the bottom end, and also smashed valves... And the only sign? Masses of blue smoke on throttle, and a lumpy idle.

funny thing is i drove it for the first time in 7 months after my accident and this happends

it wasnt clicked over for 7 months cos i had a front end colision

ony drove it 100 kms grr i misss it lol

The noise you are hearing wouldn't be a sticky lifter would it?

If you haven't started it for 7mths you might hearing something that is unrelated to dropping the porcelain in there....if you are lucky.

Security I thought of that today and u got a point

my friend contacted me and he said he had the same prob and he said. Could possibly flush it out and hope it hasn't scattered around the head. Bt if I still hear it I'll take the head off and go from there

thanks for the help ts been stressful

what if i tightend the spark plugs too hard woud it make a clunking sound?

impossible unless you fitted the wrong plugs (projected type), skyline plugs MUST be BCP type.... we use BCPR7ES, i see alot of BKR plugs in rb's and they are also WRONG.

The porcelain makes nice divits in the head and piston which in turn cause hotspots and promote pre ignition (pinking)

impossible unless you fitted the wrong plugs, skyline plugs MUST be BCPR type.... we use BCPR7ES, i see alot of BKR plugs in rb's and they are also WRONG.

The porcelain makes nice divits in the head and piston which in turn cause hotspots and promote pre ignition (pinking)

nothing wrong with BCP7ES :-) who needs that damn resistor anyway

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...