Jump to content
SAU Community

Recommended Posts

Thanks Fellas,

I really didn't know how I was going to do the video until a few days ago. I took lots of footage but having a "static" car isn't nearly as exciting as my usual video footage at track days or Texi.

So good thing I took all those stills, the montage effect really made the video come to life with a few moving video bits for diversity.

Thanks for the positive comments.

The video and the others I've been doing this year will all be on the "Intro to Club Motosport DVD" that is really beginning to take shape.

Let me know if you need a hi quality copy before the full DVD is ready. I can always have Alex (3rd Year Apprentice where you work) drop it off to you.

rds

Eric

The video and the others I've been doing this year will all be on the "Intro to Club Motosport DVD" that is really beginning to take shape.

Let me know if you need a hi quality copy before the full DVD is ready. I can always have Alex (3rd Year Apprentice where you work) drop it off to you.

rds

Eric

Eric what a small world we live in. Young Alex has a really cool old BMW which I love (don't tell him that though),,,could you please burn me a Hi-Qual copy and give it to him. I'd pay good money for it!!!.

Thanks mate

Neil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...