Jump to content
SAU Community

Recommended Posts

Well some exciting things have happened. After a big weekend I got the fuel system all plumbed up and finished. A shitload of little fiddly things that I came across also fixed. Earlier tonight I managed to start it and it ran for about 10 seconds before my shitty malpassi fuel reg shat itself. It split open and sprayed fuel everywhere, so now i gotta either try and fix it or just buy a new decent fpr and replace it and try again. No biggie though.

Im happy with the initial start up too. Oil pressure came up nice and quick and there were no leaks anywhere. Lol well apart from the fuel reg! Otherwise I was pretty lucky :banana:

post-12828-1278853154_thumb.jpg

post-12828-1278853525_thumb.jpg

I took these earlier on today. There is quite abit more shit in the engine bay now. Will get some more pictures tomorrow, hopefully with better news about the fuel reg too.

Edited by r33_racer

Good news! She fired up and idled perfect! I managed to get a new edelbrock fpr from performance wholesale today and with a little bit of stuffing around making fittings and whatnot, got the fuel system replumbed up and set! Ran it first with just the extractors and it was pretty cool. Hooked up the rest of the exhaust system and ran it again and fark me the supercharger is so loud....Hardly any real whine, its more like hardcore whiring and the induction noise is fricken sweet though also equally loud. I was a little scared actually, not being accustomed to such noises. Its all different.

When I get the rest of the small shit finished ie. catch can, small exhaust leak to be fixed, egt wiring and accusump wiring done Ill take some videos of it running so you can too experience it :down:

This is how it looked tonight.

post-12828-1278940276_thumb.jpg

post-12828-1278940879_thumb.jpg

It is quite a mess in there. Hopefully when its all finished it will be a little tidier!

What an exciting afternoon. Im still stoked that it runs and with no leaks or major issues! Doing so many custom things all at once I was expecting a bucket load of dramas. I must say Ive been quite lucky so far.

Yeh im hoping to be ready to get her tuned next week sometime. Im excited about that bit.

Thanks mate! Yeh its all abit different to your usual turbo setup. Sounds a hell of alot different too!

Correct Andrew, that is the egt unit. Well units, they all slide into eachother. Im starting to struggle for space. Once everything is finished and in, I really dont think I could fit anything more in the engine bay at all!

You should go for it Andrew and supercharge your new rb30! :D:);)

Rough idea on how much its cost me so far....for pretty well everything, not just the supercharger shit, i think im around 10k so far. So if you did it all yourself as well, I would budget maybe a few grand less and there you have it!

I could see how the labour charge from a workshop to do this would easily double that figure. Though they would get it done way quicker then me. If they knew what they were doing (which I didnt really) I reckon a good couple of weeks would pull it up. But that would be full time working on the car. Not on and off as they do sometimes as they juggle jobs around.

Lol cats and birds...The induction noise from this sucker would seriously make you believe it would ingest such things. Its frightening how hardcore it is when it start compressing the air.

lol titz.

Michael this thing is fuckin amazing. really is. engine bay looks so clustered would be a bitch to work on if something does stuff up *knock on wood*

I cant wait to hear it in the vid but i know it will be nothing to the sound in real life. good work mate!

SLY-25T Cheers mate. Yeh it really is stuffed full of shit. I may go into a slight depression if something does go seriously wrong before I get to enjoy it properly. So hopefully it all goes to plan and then I wont have to worry about working on it. Im hoping the video will do it some justice. The noises it makes are just awesome.

Spark911 yeh mate it is. lol its nearly driven me mad working on it for so damn long too. I will be getting it tuned at Mercury Motorsports since they tune our race car also.

skyline01999 Im very eager to see the results of this thing too. My fingers are crossed, so hopefully it delivers the goods! Cheers.

Sad note, no work on it tonight. Gotta hang with the gf. They are only understanding to a certain point unfortunately.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...