Jump to content
SAU Community

Recommended Posts

Willall Racing just ran a 1 min 12.19 at Mallala today in their JDM R35 GTR.

Faster than the group A R32 GTR!

Congratulations Keir & Martin. You guys are flying now.

E85 looks like the way to go, when are you going to fit the bigger turbos?

Wish I was there................. oh well. I will keep working.

Link to comment
https://www.sau.com.au/forums/topic/307957-r35-faster-than-group-a-r32-gtr/
Share on other sites

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

congrats, its great that a relatively standard 35 gtr tweaked by a few cluey guys in the city of churches has outdone a 21 year old R32 with extensive race history funded by a rich tobacco company with part factory backing run by one of the best in the business :)

:laugh:

Today was one of those fruitful testing sessions where the track is 'in the slot' versus other times recently when we have been there where the drifters have convered the corners is dirt, or the supertrucks had laid diesel everywhere. No excuses today, it was a good solid fast track condition day and with plenty of time we were able to run some good data on the car and start to dial in the suspension and wing settings. Best part though is that after a couple of months working on our EVO programme I was able to get back in the chair of the GTR and have a feel of the setup....I was fortunate enough to have the opportunity of 'de-greening' the slicks in the morning session, which is kind of like trying to drive a 9 second drag car on ice.

The biggest problem the GTR faces in its current guise is that it is traction limited. Believe it or not, even with a set of new Michelin medium compound slicks on board and properly bedded in controlling wheelspin through the esses and out of turns three and five is a real problem, and one that can panic the four wheel drive electronics if not managed correctly. You really need to feed the throttle to stop the fronts and rears lighting up and pushing the car into a big sideways moment. I found this out early on in the piece when the tyres were still green. The pure raw straighline speed of the car is unnerving as it builds speed so quickly, and is stretching well into fifth gear at the braking points, as is keeping the throttle into it through the kink and the long left hander out of the nothern hairpin. Its a difficult balancing act, and one I wasnt prepared to push the limits of after the break, so 14s over the three laps I did was acceptable. The whole time you need to keep the thought that this is a 700hp+ road car chassis in the back of your head and drive accordingly. It would be interesting to take one of the 'these cars drive themselves' crew for a passenger lap for the sport of it one day. My only suggestion would be to bring an adult diaper or be prepared to pay a cleaning fee :(

'Power down' engine management settings (TPS controlled boost mapping) for corner exit speed and then adjusting the relationship between bump/rebound and tyre pressure for the varying track temperatures over the day gave us the pace increase, no magic here, just a methodical work structure of test and tune. Sensibly on fresh tyres there is no reason why we shouldnt be able to record consistent 1:10 laps in this car. That might sound a little far fetched now, but 6 months ago the idea of a 1:12 in a road car would have been bordering on unbelievable, particularly as this is a stock engine, stock turbo, stock transmission car. Some well thought out modifications, a set of slick tyres and ongoing testing and development are the keys to this cars pace :(

We have some way to go still to beat the Winfield cars by the looks of it, Skaife had it on pole there in 1991 with a 1.09 or similar. One must always have targets! However we are only 3 tenths of the outright Carerra Cup lap record to put the whole thing in perspective :nyaanyaa:

Edited by Martin Donnon

+1 on the brake water spray progress..

And not to cast aspersions on you and Keir's driving skills Martin, but you have to remember it was "Thee Mark Skaife" driving that R32. We need to compare apples with apples here. What additional time would him or some other professional driver well on his game be able to extract out of your R35?

Edited by fungoolie

Interestingly enough the brake cooling system raised its head in anger when I had overlooked part of my job. Essentially I didnt mark off the bottle was filled between sessions, and sure enough there was enough water surge away from the pickup of the pump to ensure that before the low level warning was on (there was still over a litre in the tank) that the car was off an into the dirt with the brake pedal on the floor. At this pace we have four laps of full stint running before we have to refill the stock washer bottle, or risk boiling the brake fluid. To give you an idea of the temperature difference we now have a cooling system in the pits for the front brakes and the frontal cooling system of the car, when it came in with no water left in the tank the left hand side front pads caught alight, and thats after two cool down laps! :)

Sure enough though we have done some math on the car today and have worked around what I believe is some sensible SA engineering thats still roadable to get this car comfortably into the 1:10 zone at the track :domokun:

give me a drive, 3rd lap I promise you a 1.09 :)

or at least die trying !!

nice work, great read.

currently home-prepping my rb26 track car ready for its 1st rundown on 12/4/01 at the sau:sa track day

Martin

what are you max lateral g's now, vs say prior ro the slicks and/or wing? Might be handy to put a scale on the right hand of the chart

Or even post your G force polar plot please.

I didnt get around to a full G-plot today (forgot actually!)

What I can tell you though Fungoolie is that in the Esses we are seeing around 1.35-1.4 lateral G loading,

and the big one -1.2G at 202km/h on the face of the kink. Thats why it feels a little scary :down:

I didnt get around to a full G-plot today (forgot actually!)

What I can tell you though Fungoolie is that in the Esses we are seeing around 1.35-1.4 lateral G loading,

and the big one -1.2G at 202km/h on the face of the kink. Thats why it feels a little scary :P

Cogs of steel guys! 1.2G in the kink? Glad you had slicks on! :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...