Jump to content
SAU Community

Recommended Posts

  • Replies 89
  • Created
  • Last Reply

Top Posters In This Topic

+1

see if i can get off my ass and get the car back together, tune and all that stuff i will be in :P

Ill take that as you wont be coming hahahaha

In regards to yellow stickers....in my experience it will be ok as these driver training days are self scrutineered. However, if one of the instructors/staff see something that is a safety issue (steel hanging out of tyres, excessive oil leaks, seat belt held together with zip ties/safety pins) then they will exclude you from going on the track. I dont believe they will give a shit that your car has adjustable suspension that may not meet ADR.

Having said this, this is not a guarantee.

Having got another play-thing while my engine is being re-built, I will give it a go.

It's a GTI-R!

Not sure how the trapped nerve in my neck will respond to wearing a helmet, but that's another story! (I have not been having a good time the last few months!!!)

Cheers. :P

GTi-R & the mx5 can go head to head, right Keith?

Sure, sounds like fun...just waiting for the new combo to arrive and Brad install a few bits. This thing is supposed to be my daily while I'm stuck in the office but I can see it becoming a bit more as things progress :)

Seriously, the gear knob came off in my hand last time I drove it and the steering wheel isn't even round lol

Sounds like we will be well matched - my gearknob is held on by blue electrical tape!!

Hmm ... .. .. .. must see if I can get a Nismo knob somewhere. That should add 30 hp by itself!

:)

I will be away until maybe Wednesday so wont be checking on the thread or replying to PM's until i get back so pleae dont think im ignoring you.

If you have an urgent question about entry/payments, talk to Dan.

Urgent questions about the rules etc for the track day, talk to Paul.

I'll ask her, but we can't both drive, as then no-one would be there to look after Marcus :cheers:

haha pretty sure there would be plenty of people to gush over him and etc

will try to make the treck for a catchup as cherrired is still in the shed due to shifter issues and time constraints

I'll ask her, but we can't both drive, as then no-one would be there to look after Marcus :P

Nah i've done it that many times now i've lost interest. I'll find something for me and him to do that day. >_<

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...