Jump to content
SAU Community

Recommended Posts

Food, Beer, Talks, People, Cars, Beer and laughs!

These social meetings are divided into two parts, the first if your hungry is a meal from the bistro and a chance to have a chat with other members then the second is a short informal meeting.

We use these meetings to give quick rundowns on past events with video's, pictures and stories etc, to address pressing matters, tell members what's happening behind the scenes and for discussion on upcoming events. It's all pretty relaxed and fun. This is a great opportunity for those of you who don't know too many members to come down and mix as new faces are always welcomed.

Time - 8.00pm start, dinner from 6.30 ish

Date - Tuesday 16 March 2010

Location - Bell's Hotel, 157 Moray St, South Melbourne (Cnr Moray St & Coventry

St Melways Ref - 57, G1)

Note - This Pub is family friendly with an area set aside for us. There is plenty of seating (tables and chairs) and meals for all.

Who is welcome - Everyone!

UPDATE:

GUEST SPEAKER

Will Day will be guest speaking (thanks Pat for organising).

Here is a bit of a run-down of what he will be chatting to us about, he spent a lot of time with Nissan in the Test & Dev in the era of the R32 GTR :D

1. In production – We were still building R31 Skylines (including SVD) together with Pulsars and Pintaras when I was in manufacturing.

2. In development – I was in the test group for the whole development program of the N14 Pulsar. We also did the local certification of the R32 GTR and can explain the local mods that were made.

3. Spare parts support – Some of the horror stories for ongoing supply of spares, particularly on low volume specials like the GTR and SVD Skyline GTS.

MERCHANDISE

- Let me know if there is anything you would like me to bring along for you to look at.

Hope to see you all there.

:down:

Link to comment
https://www.sau.com.au/forums/topic/310433-general-meeting-tuesday-16-march/
Share on other sites

Im expecting to see a lot of new faces at this meeting.

I will run a pre meet in the SE if someone will put there hand up to put a pre meet together in the West

and we will meet up at South Melbourne at the Meeting.

This would be a great way for all you people that want to go but not keen on turning up alone.

I will post tread in Events section.

Cheers

spose i could come.. although i dont know there is many paid members from west? so wouldnt be much of a premeet or can anyone attend this stuff?

Yep, anyone and everyone is welcome.

Alot of people aren't aware of this...Bec does write it in the subtitle and body of the original post, but maybe we need to promote it more?

UPDATE:

GUEST SPEAKER

Will Day will be guest speaking (thanks Pat for organising).

Here is a bit of a run-down of what he will be chatting to us about, he spent a lot of time with Nissan in the Test & Dev in the era of the R32 GTR :laugh:

1. In production – We were still building R31 Skylines (including SVD) together with Pulsars and Pintaras when I was in manufacturing. I could speak a little about how good (or bad) these cars were to build.

2. In development – I was in the test group for the whole development program of the N14 Pulsar. We also did the local certification of the R32 GTR and can explain the local mods that were made.

3. Spare parts support – Some of the horror stories for ongoing supply of spares, particularly on low volume specials like the GTR and SVD Skyline GTS.

I think this will be quite interesting - make sure you come along!

Ive managed to pull a fair bit of strings at work and have managed to talk my boss into coming down to the meet as a guest speaker.

He used to be a test engineer at the nissan manufacturing plant in Victoria and then became Engineering Manager, National Parts Division.

This was during the late 80's to early 90's and includes developing and building the R31 SVD, R32 GTR and N14 Pulsar SSS

He has a load of stories about the build quality of these cars, r32 gtr certification (including test drives and its thrash-ability :laugh: ) and souring spare parts when they broke back in the 90's.

I would like everyone to come as Ive put in a lot of effort to get him!!!!!!!!

Giving you a chance to ask about the R32 GTR when it was released in Australia in mint condition! Dont waste this opportunity!!!!

Back to you Ash :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...