Jump to content
SAU Community

Recommended Posts

drove the 32 out of the garage, around the block and behind the ceffy so I could work on it.

dunno why, but i just bought a set of wheels for the 32. 18x8.5" +3 and 18x9.5"+0.

dammit. I'm supposed to be selling this bucket of hopes n dreams held together by zipties.

BIM Driftmasters...

makethumbimageaspx1wd1.jpg

http://www.neweraparts.com/Default.aspx?ta...p;ProductID=818

hmmm gota decide if i should buy this girl ive gone out a few times a valentines day present

i am buying dinner/movies for the night

hells no. if you're not dating her no present. you'll come off as corny/desperate or make her feel bad for not gettin something for you. paying for dinner/movies is enough, and if she's smart enough will appreciate it.

if you've been goin out for a while then present is fine, if not... gtfo. flowers might be better... no obligations for her to reciprocate.

hells no. if you're not dating her no present. you'll come off as corny/desperate or make her feel bad for not gettin something for you. paying for dinner/movies is enough, and if she's smart enough will appreciate it.

if you've been goin out for a while then present is fine, if not... gtfo. flowers might be better... no obligations for her to reciprocate.

Yeh didnt mean present like that

flowers are a present

thought about chocolates...... but dont want her to get fat and could start a chain reaction haha

fvs_p03.jpg

P1010137.jpg

p1.jpg

9.5 +0:

p1.jpg

yeh seen them before they nice

do BIM make a 7 spoke wheel also? that they use on the vertex r32 4 door demo car?

they look very similer in design

r32gtrtuffuru.jpg

Get it!

:)

na R33's are going for around 7-11k. theres an S2 on ebay but yeah nahh. dented, front tires full of tread, rears need changing. i wonder what that cars been through.

forgot to say: would be awesome to respray in red..

hmmm gota decide if i should buy this girl ive gone out a few times a valentines day present

i am buying dinner/movies for the night

if shes your girlfriend then yah.

if your just dating then nah.

Edited by GTR-boy
na R33's are going for around 7-11k. theres an S2 on ebay but yeah nahh. dented, front tires full of tread, rears need changing. i wonder what that cars been through.

forgot to say: would be awesome to respray in red..

if shes your girlfriend then yah.

if your just dating then nah.

Yeah don't buy it off Ebay.

Get one from a car dealer so you can see the car in person.

na R33's are going for around 7-11k. theres an S2 on ebay but yeah nahh. dented, front tires full of tread, rears need changing. i wonder what that cars been through.

forgot to say: would be awesome to respray in red..

if shes your girlfriend then yah.

if your just dating then nah.

haha i bought flowers they are still a present as i see it :)

yeh when i was looking for a n/a 33 (on Ps atm) went all over the place.. so many shitty ones that P platers or young people have just completely rooted.. one guy i went to his house (was asking 12k) all the way to northern suburbs and he was completely hung over.. key marks all over the car which wern't on the pics.. ricey bright floor mats.. and just bad condition in general..

oh and another one.. was so low that when we went for a test drive in it going out his driveway at 1km/h scraped like a mofo..

lucky i found a good one on the last one i was going to look at on carsales, still hasnt skipped a beat.

mm fair enough

i guess ill get it fully checked over before i buy one.

on another note:

went and saw wolfman

since i get scared very easily, i was shitting myself

but it was pretty good. epic fight at the end

yeh when i was looking for a n/a 33 (on Ps atm) went all over the place.. so many shitty ones that P platers or young people have just completely rooted.. one guy i went to his house (was asking 12k) all the way to northern suburbs and he was completely hung over.. key marks all over the car which wern't on the pics.. ricey bright floor mats.. and just bad condition in general..

oh and another one.. was so low that when we went for a test drive in it going out his driveway at 1km/h scraped like a mofo..

lucky i found a good one on the last one i was going to look at on carsales, still hasnt skipped a beat.

lucky you didnt buy it wouldnt wana be stuck with ricey floor mats :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...