Jump to content
SAU Community

Recommended Posts

I found that Getrag 6 speeds are very quiet...

More so I didn't notice it being noisy...

its got the odd clunk here and there, mainly going from 2nd to 3rd. cold mornings are not really helping can be a bitch to get 2nd sometimes. but then im not used to these gearboxes. the manuals ive driven were little cars and than my old r34 was auto. so in all seriousness i dont know anything and should stfu lol.

on another note its going in for a full service and suspension is getting changed also new caster arms fitted, should be even better after this.

its got the odd clunk here and there, mainly going from 2nd to 3rd. cold mornings are not really helping can be a bitch to get 2nd sometimes

it does that if you have the wrong viscosity oil in the box, or if you're still running jap oil in your aus car. which is probably why it runs smoother when you drive it for a while cos it's had a chance to heat up and become more fluid.

same principle as engine oil... thinner oils for turbo cars etc so your turbo doesn't choke while the oil heats up slowly.

which is why people reckon redline's a miracle oil. it's just a different composition to the regular stuff.

it does that if you have the wrong viscosity oil in the box, or if you're still running jap oil in your aus car. which is probably why it runs smoother when you drive it for a while cos it's had a chance to heat up and become more fluid.

same principle as engine oil... thinner oils for turbo cars etc so your turbo doesn't choke while the oil heats up slowly.

which is why people reckon redline's a miracle oil. it's just a different composition to the regular stuff.

thanks for that, you learn something new everday :O . its getting serviced next week so it should be all good after that.

it does that if you have the wrong viscosity oil in the box, or if you're still running jap oil in your aus car. which is probably why it runs smoother when you drive it for a while cos it's had a chance to heat up and become more fluid.

same as engine oil... thinner oils for turbo cars etc so your turbo doesn't choke while the oil heats up slowly.

Yeah that's one scenario.

its got the odd clunk here and there, mainly going from 2nd to 3rd. cold mornings are not really helping can be a bitch to get 2nd sometimes. but then im not used to these gearboxes. the manuals ive driven were little cars and than my old r34 was auto. so in all seriousness i dont know anything and should stfu lol.

on another note its going in for a full service and suspension is getting changed also new caster arms fitted, should be even better after this.

Well the R34 GTR is not all that new these days... It be good to give it time to warm up, so when you drive the car, just take it easy for about 5 - 10 mins and gear changing should smoothen up.

Like what Shan said, do a gear box oil change and see how you go.

Getrag 6 speeds are tough gear boxes... (To a point...) And will take you a long way with the right maintenance and usage.

Yeah that's one scenario.

Well the R34 GTR is not all that new these days... It be good to give it time to warm up, so when you drive the car, just take it easy for about 5 - 10 mins and gear changing should smoothen up.

Like what Shan said, do a gear box oil change and see how you go.

Getrag 6 speeds are tough gear boxes... (To a point...) And will take you a long way with the right maintenance and usage.

thanks for the info i appreciate it, ill let you know how it all goes next week after the service is done.

nah dont think so man, especially that its at showgrounds... if it was at exhibition centre i would cause when i get bored i would head to crown lol

ahh fair enough (damn, lift possibilities are gone! :O)

how do you get to the show grounds with public transport?

lol rightio..

i clicked vic wast... scroll down and see a box and think wtf.. then i see your reply haha

whats up with the box?

enjoy it. its the only box you'll ever see.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
×
×
  • Create New...