Jump to content
SAU Community

Recommended Posts

Yo yo, I havn't adjusted it at all cost me like 300 all up with a wheel alignment and height adjustment to lowest legal, they setup the stiffness on what you say I told them I will be using it mainly for street and a bit of track work so they did so quite well I think (traction tyres in rowville) so couldn't answer your question apart from recommending to get someone else to do it, because they gave me a sheet with camber % and all these different readings which I had NFI about, and even if I did how the hell would one get into that much detail in there own garage with a jack.

fair enough,im getting mine done on thursday along with a full service, belts and everything so im looking forward to getting that done and knowing my car will be very healthy.

what's the industry term for the printing on the NS hoodies? don't think it's screen printing, it's more like a heat transfer style...

I need to find a place that can do it..

silk screening?

thermal transfer?

what's the industry term for the printing on the NS hoodies? don't think it's screen printing, it's more like a heat transfer style...

I need to find a place that can do it..

Goto one of those "T-Shirt" bar places and they could transfer the image on for you...

silk screening?

thermal transfer?

I'm thinking it's thermal/heat transfer style, but the singlets I've got from last years pre season just have this certain feel about them (where the printing is)....I'll have to take that to a few places as a sample and hope they can match it

Not exactly on the scene with my current vehicle

need to man up and get a gtr then :D

reporting for duty.

and u aint no gtst sedan stop false advertising

haha i used to be cool :blink:

now i just drive a yellow lancer

i hope so - was a very rough start / idle too

first time its ever done it

noticed when I turned the headlights on i could hear a bit of a whining from the engine same when i pushed brake in a tiny bit :S :D

which i have never heard before also

Lol Leigh you stooge. I'll install a head unit for you. It's a piece of piss. Already did 3x r33, 2x r34, alfies celica and prob more lol

lol i know how to do it just needed the wiring diagram :huh:

had the head unit in my closet for a month so i figure ill put it in and do some cheap speakers at the same time, cbf with a good sound system anymore i only use it every now and then for a few tunes and dont tend to crank it

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...